Navitel MS500 [4/19] Using device in vehicle

4 | USER MANUAL

Choosing a place to install on the windshield

1. Pay particular attention to the installation location of the

navigator. Do not install in places where the navigator may

interfere with the airbags or reduce driver’s eld of vision.

2. Pay attention to the cleanliness of the installation surface; it

must not be dusty, dirty or wet. There should be no air bubbles

or protective lm on the mount’s suction cup, as this aects the

force of xation to the windshield. Damage to the navigator

or other objects in the car which was caused by a fall due to

disconnection from the mount are the sole responsibility of

the user and are not a guarantee case.

3. If the windshield has a built-in window defogger or UV

protection, GPS reception may be impaired.

Using Device in Vehicle

Setting up the “suction cup” type of mount on the windshield

- Remove the protective lm from the mount’s suction cup;

- Choose a suitable place on the windshield or side window;

- Attach the suction cup to the selected spot on the windshield

and x the DVR mount by turning the latch.

With proper use, the mount’s suction cup attaches the device well

to the windshield/side window, but if you leave the xed mount

in the car at night, the xing force may weaken due to moisture

condensation in the suction cup with a decrease in temperature.

To prevent damage to the navigator, mount or other things in the

car, it is recommended to remove the navigator and the mount

from the glass at night.