Kuppersberg WS 60100 [9/48] Connect the drain hose

Kuppersberg WS 60100 [9/48] Connect the drain hose
9
ENGLISH TECHNICAL PASSPORT
Washing Machines
WARNING
When the four feet are in close
contact with the oor, the washing
machine must be completely level and
secure. When the washing machine is
level, make the feet as low as possible.
Improper levelness adjustment
will result in the washing machine’s big
noise, vibration, displacement, etc.
There is a vent at bottom of the
washing machine (do not block it). Place
the washing machine on a solid, at
and skidproof fl oor. To avoid injuries, do
not place the washing machine on soft
blanket, wooden fl oor, platform or rack.
Connect the inlet hose
1. Connect the inlet hose to tap and
fasten it anticlockwise.
2. Connect the other end of the inlet
hose to the inlet valve at the backside
of the washing machine and fasten
the hose tightly clockwise.when
there is a inlet at the back of the
machine,it must be connected to a
cold water supply. If there are two
inlet valve,one is connected to a
cold water supply and the other is
connected to a hot water supply.
Follow the indication of the picture
below to complete the connection.
NOTE
If there is any leakage with hose
after the connection, then repeat the
steps to connect inlet hose.
Do not bend the hose.
Check for inlet hose connection
carefully before using the washer each
time.
Connect the drain hose
The drain hose shall be placed at
a height of 65-100cm above the oor,
otherwise,it can cause poor drainage.
You can use the supplied drain
hose support bracket to loop the drain

Содержание

Похожие устройства

Скачать
Случайные обсуждения