Grundig WK 4260 [7/10] Operation_________________________________
Макгруп McGrp.ru
Задайте вопрос
Зарегистрироваться

Grundig WK 4260 [7/10] Operation_________________________________

Grundig WK 4260 [7/10] Operation_________________________________
15
ENGLISH
Preparation
1 Remove all packaging and sticker materials
and dispose of them according to the applica-
ble legal regulations.
2 Before using the appliance for the first time,
clean all parts which come into contact with
water carefully. (See the “Cleaning and care”
section).
3 Completely roll out the power cord from the
power cord storage
G
on the bottom of the
base. Pass the power cord through the slot on
the base.
4 Clean kettle well before initial use and dis-
card water of first two boiling cycles.
Operation
1 Push the lid release
B
back to open the
lid
A
.
― The lid
A
opens automatically.
2 Fill the water tank
H
with water.
Notes
7
Do not place the water tank
H
on the base
while filling it with water.
7
Never fill the water tank
H
above the maxi-
mum level indicator or below the minimum
level indicator.
3 Close the lid
A
until it clicks into place.
4 Place the water tank
H
on the base. Make
sure that it is sitting in an upright and stable
position.
5 Insert the plug into the wall socket.
6 Press down On/Off switch
E
to >>I<< posi-
tion.
― On/Off switch indicator
F
lights up blue
inside and boiling process begins.
Note
7
Lid
A
should always be closed during the
boiling process; otherwise the kettle will not
switch off automatically.
7 After a few minutes, the water will start to boil.
The kettle switches off automatically.
― On/Off switch
E
moves upwards to „0“
position and the blue light goes off.
Note
7
If you want to stop the heating, push the On/
Off switch
E
to „0“ position.
8 Disconnect the plug from the wall socket.
9 Take the water tank
H
from the base. Only
hold it by the handle
C
.
Caution
7
Do not open the lid
A
as hot water could
splash out. Make sure that no water splashes
onto the base.
10 Pour the water from the spout
J
to the cup
or glass you want to use.
Notes
7
If you want to continue the heating process,
repeat the procedure from 1 to 10.
7
Let the kettle cool down between each heat-
ing process.
Hints and Tips
7
The kettle is equipped with a filter
I
which
filters out limestone and other residues when
the water is being poured out.
7
Use softened or filtered water to prevent lime
build-up.
OPERATION _________________________________

Содержание

Похожие устройства

Скачать