Grundig TA 5260 [7/11] Operation________________________________
Макгруп McGrp.ru
Задайте вопрос
Зарегистрироваться

Grundig TA 5260 [7/11] Operation________________________________

Grundig TA 5260 [7/11] Operation________________________________
16
ENGLISH
OPERATION ________________________________
Preparation
1 Remove all packaging and sticker materials and
dispose of them according to the applicable
local regulations.
2 Before using the appliance for the first time, clean
the appliance (See the “Cleaning and care”
section).
3 Make sure that the appliance is in an upright
position and on a stable, flat, clean, dry and non-
slip surface.
Note
7
When using the appliance for the first time,
smoke can develop due to production
residues. However, this does not mean the
appliance is defective. The first time you
switch it on use the appliance as you normally
would but without bread. It is recommended
to use the medium setting of the browning
control
C
to burn in. Ensure for proper room
ventilation.
Toasting
1 Insert only one slice of bread in each of the two
bread slots
B
.
2 Connect the power plug into the wall socket.
3 Using the browning control
C
select the desired
degree of browning between 1 and 7.
Notes
7
Pushing the browning control down to 1 will
give the lightest degree of browning and up
to 7 the darkest. The browning degree can
vary depending on the type of bread.
7
When toasting several slices of bread
consecutively, the toaster will become hotter
and therefore the bread will gradually
become darker. Therefore select an
appropriate browning degree. Let the toaster
cool down after each toasting process for
minimum 30 seconds.
7
The degree of browning of one slice is darker
than two slices, although the browning control
C
is set to the same level.
4 Press the start lever
D
down until it automatically
snaps into place.
‒ The toasting process begins. The indicator light
of the stop button
G
illuminates during the
toasting process.
Notes
7
If the power plug is not connected into the
wall socket, the start lever
D
does not snap
into place.
7
The degree of browning can also be adjusted
during the toasting process with the browning
control
C
.
5 The appliance automatically switches off as
soon as the set degree of browning has been
reached.
– The start lever
D
springs back up and the stop
button
G
light goes off. The toast slices are
pushed upwards and can be taken out of the
toaster.
Notes
7
To cancel the toasting process before it has
finished, press the stop button
G
. The start
lever
D
springs back up and the toast slices
can be taken out of the toaster.
7
After the start lever
D
springs back up, you
can use high-lift function by pushing the start
lever
D
upwards.
Caution
7
Be very careful when taking the toast slices
out of the toaster as the metal parts of the
toaster and also the bread can become very
hot.
6 Disconnect the appliance from the wall socket.
7
If toast slices get stuck in the toaster, switch the
toaster off immediately by pressing the stop
button
G
. Pull the power plug out of the wall
socket. Let the toaster cool down completely.
Carefully try to take the bread out of the
toaster without damaging the sensitive heating
elements and other parts. Do not use any
electroconductive objects to remove the bread
from the toaster.

Содержание

Похожие устройства

Скачать