Monsher TOWN 60 W Инструкция по эксплуатации онлайн [4/32] 559551

English

6. Use aluminum filter that comes with the appliance. The use of other materials

is prohibited!

7. Do not connect the appliance to the power supply system, until the assembly

and installation of the appliance is completed.

8. Do not use the appliance without the aluminum filter in place.

9. Do not touch the lamps.

10. Do not remove the aluminum filter while the appliance is in operation.

11. Do not disconnect the appliance from the power supply system directly.

If necessary, turn the appliance off using the control panel and, only after that,

unplug it from the power supply system. When switching on: first connect the

appliance to the power supply system, then switch it on using the control panel,

but not vice versa!

12. The appliance requires regular cleaning and maintenance work.

13. When installing the appliance, observe the required distance between it and

the cooking surface of your stove:

- for an electric stove: at least 65 cm

- for a gas or gas-electric stove: at least 70 cm

14. Do not allow children to play with packaging materials, it can be dangerous!

15. For best air cleaning in your kitchen, do not turn off the appliance immediately

after the cooking process is completed: let the appliance run for a further 15

minutes. For this purpose you can also use the timer function (the button «Auto

Switch Off Timer» on the control panel).

16. Ensure adequate ventilation in the kitchen, if a gas stove is operated

simultaneously with the appliance.

17. In case of any malfunctions, contact your nearest authorized service center.

18. If the kitchen hood is supposed to operate in air discharge mode, then during

installation it is important to provide a duct of the corresponding diameter. To

prevent loss of performance caused by aerodynamic resistance of the duct, the air

duct must not be too long, or curved. Never restrict the duct size, or make sharp

bends. In addition, it is preferable to use smooth PVC duct (round or flat), rather

than the flexible corrugated one because bends of a corrugated duct increase the

noise level of the hood.

19. The manufacturer does not bear any responsibility for any possible damage,

in case of non-compliance with above precautions.