Grundig VCH 6130 [6/9] Operation ________________________________
Макгруп McGrp.ru
Задайте вопрос
Зарегистрироваться

Grundig VCH 6130 [6/9] Operation ________________________________

Grundig VCH 6130 [6/9] Operation ________________________________
14 ENGLISH
OPERATION ________________________________
Wall rack installation
Notes
7
Install the wall rack
Q
near an appropriate
power outlet, this allows you to charge the
unit hassle-free.
7
Make sure that the nearest power outlet is
reachable by the power adapter
P
.
7
Leave sufficient free space above the wall
rack so you can easily place the vacuum
cleaner on the rack.
7
Install the wall rack out of the reach of chil-
dren.
7
Screws and dowels are included.
1 Install the wall rack
Q
at the desired wall
position.
2 Mark boreholes for the three screws.
Caution
7
Make sure that you do not drill over wiring,
cables or water pipes!
3 Drill the boreholes and insert dowels.
4 Secure the wall rack
Q
with three screws.
Charging the batteries
1 Insert the adapter cable
P
in the port
K
of
the motor unit
J
.
2 Connect the power adapter
P
to an
appropriate power outlet.
– The charge indicator
L
lights up blue and
will be off after the battery is fully charged.
– The vacuum cleaner must be turned off
while charging.
– The vacuum cleaner is fully charged after
approx 14 hours and the operating time is
7 to 10 minutes.
Notes
7
Only recharge the batteries when they are
nearly empty. This increases the batteries
lifespan.
7
Charge the batteries at a room temperature
between 0°C and 37°C.
7
To increase the battery’s lifespan, charge
the batteries completely before the first use
for approx .16 hours and discharge it again
completely.
7
The maximum charging time is 24 hours and
may not be exceeded.

Содержание

Похожие устройства

Скачать