Timberk TAP FL600 MF (BL) [6/24] Attentions

www.timberk.com • electric air purifier

ATTENTIONS!

• The collector cell may not require if «arcing» occurs.

Arcing is a snapping sound that occurs when large

particles are collected in the collector cell or the

appliance used in over-damp rooms.

• If prolonged or continuous arcing occurs, the

collector cell should be cleaned.

• To prevent damage to the components of the

collector cell, do not put in dishwasher or use a cotton

swab.

• Tough residue such as tar from tobacco smoke may

need additional cleaning or longer soaking.

• The collector cell must be completely dry after

cleaning in order to operate properly. If the power

supply detects the collector cell is wet, it shuts down

power to the cell and cause the red «CLEAN CELL»

indicator to blink rapidly. Please re-dry the collector

cell until the power supply successfully restarts, the

appliance will return to its original speed and run as

normal.

Cleaning the Pre-Filter

1. Unplug the appliance.

2. Open the cover from the right side by pressing the switch.

3. Pul the pre-filter straight and let it air dry before placing it back in the

cabinet. Do not use heated or compressed air as part of the drying process.

4. Insert the pre-filter back into the unit.

5. Close the cover securely.

Cleaning the Exhaust Grille

1. Remove the cleaning brush from the storage slot located under the cover.

2. Brush away debris that has collected between the grille slots.

3. Return the cleaning brush to the storage slot.

Fig. 3

Fig. 4