Fubag IW1600 3/4\'\' (100198) [5/10] Transport torage
Макгруп McGrp.ru
Задайте вопрос
Зарегистрироваться

Fubag IW1600 3/4\'\' (100198) [5/10] Transport torage

Fubag IW1600 3/4\'\' (100198) [5/10] Transport torage
www.fubag.ru
Omperator's anual
- 4 -
6s
7
. Transport & torage
. Warranty
In case of long term work brake it is necessary to keep the tool at the temperature of +5 + 25°С
and humidity not more than 70%. It is recommended to pour 10-20 ml of oil into it and blow it through
with the minimal pressure.
During transportation and storage of the tool keep it away from damp. The tool should be kept in a
dry, well air conditioned place. Do not expose it to damp, corrosive and dangerous gases and dust.
After the package is unsealed the tool should be repacked in case of transportation to the workplace
or for storage.
Warranty refer to defects of materials and components and do not refer to components subject to
natural wear and maintenance work.
Only machines cleaned from dust and dirt in original factory packing fully completed, provided with
instruction manual, warranty card with fixed sales date with a shop stamp factory serial number and
originals of sales and ware receipt issued by salesman are subjects of warranty. Within the warranty
period the service center eliminate free of charge all detected production defects. The manufacturer
disclaims warranty and legal responsibilities if nonobservance of the instruction manual by user,
unqualified disassembling repair or maintenance of the machine as well does not bear responsibility
for caused injury to persons or damages.
…
5. Troubleshooting
Fault Possible cause Correction
Insufficient pressure in the air
line
Develop the pressure up to 6.3
bar
Blade tear and wear Change the blades
The tool won’t develop enough
power
Slackening of the engine mount
Tighten the screws of the mount
(if necessary change the rubber
ring)
There is spindle wavering and
bang during the operation
Tear and wear of the engine
bearings
Change the bearings
When engine rotating the spindle
won’t rotate
There is a breakdown in the
place of connection of the rotor
with the spindle
Change the details worn
There is no lubrication there
Disassemble the tool, flush the
details and lubricate them
The housing is warmed, the
spindle won’t rotate
Tear and wear or break down of
the reducer
Change the details worn out
The engine won’t rotate after the
long term storage
Engine blade swelling
Bring the size of the blades to the
required one

Содержание

Похожие устройства

Скачать