OKI C711DM [9/20] Setting up the oki dicom embedded printer

9



1. Setting up the OKI Dicom Embedded

Printer

1-1 Install the printer

The following procedures are performed while referencing the Setup Guide/ User’s

Guide/ Network Guide supplied on CD/DVD with the printer.

1. Remove the OKI Dicom Embedded Printer (hereinafter referred to as “printer”)

from the packing box and install it.

2. Remove the protective tapes and the protective sheets from the printer.

3. Open the top cover, and remove the stopper (orange) of the fuser unit.

4. Install the image drum.

5. Load paper on the paper tray. (For DICOM format image printing only A4,

Letter and for A3 printer models A3 and Tabloïd are supported.)

6. Connect the AC cord to the printer, and turn on the power.

Note!: Do not connect the network cable to the printer yet.

7. Enter the IP address provided by your network administrator with the printer

control panel.

Perform test printing, and confirm that the IP address is set for the printer correctly.

8. Connect the network cable to the printer.

Next, set up the printer from your computer.

Prepare a computer connected to the same network as the printer.