SilverStone SST-MS05B(Черная) [2/3] Ms05 manual 02

This is a unique product, please read the following detailed

installation guide we have prepared meticulously for you.

Step2 install the 3.5" docking bay

9.In USB mode, only USB

cable needs to be

connected

3. Connect the SATA cable to

motherboard

4. Connect the power cable to

power supply

7.Slide the assembled internal

tray back into the MS05

enclosure. Take great care to

ensure that no wires or cables

are caught in between the

enclosure and the tray

8.In eSATA mode, both eSATA

and USB cables must be

connected

5.Push the hard drive forward

until it is connected to the

SATA connector

3.Pull and slide out the

internal tray

6.Secure the hard drive by

inserting and tightening

four screws on bottom of

the tray

1.Prepare for installation

(2.5" hard drive shown must

be purchased separately)

2.Remove two screws located

on the side with the I/O port

4.Place SATA hard drive in

the internal tray

1.Take out the 3.5" drive bay

cover

2.Place 3.5" docking bay into

the chassis and fasten it

with screws