Daikin EHVZ08S18CB3V [17/28] Configuration

5 Configuration

Installation manual

EHVZ04~16S18CB3V

Daikin Altherma – Low temperature split

4P401672-1E – 2018.02

Leaving water temperature: Emitter type

# Code Description

[A.3.1.1.7] [9-0B] Reaction time of the system:

Set for the main temperature zone

▪ 0: Quick. Example: Small water

volume and fan coils.

▪ 1: Slow. Example: Large water

volume, floor heating loops.

Depending on the system water volume

and the heat emitters type, the heat up

of a space can take longer. This setting

can compensate for a slow or a quick

heating system by adjusting the unit

capacity during the heat up cycle.

5.2.6 Domestic hot water control

# Code Description

[A.4.1] [6-0D] Domestic hot water Type:

▪ 0 (Reheat only): Only reheat operation

is allowed.

▪ 1 (Reheat + sched.): Same as 2, but

between the scheduled heatup cycles,

reheat operation is allowed.

▪ 2 (Scheduled only): The domestic hot

water tank can ONLY be heated

according to a schedule.

[A.4.5] [6-0E] The maximum temperature that users

can select for the domestic hot water.

You can use this setting to limit the

temperature at the hot water taps.

INFORMATION

There is a risk of space heating capacity shortage/comfort

problem (in case of frequent domestic hot water operation,

frequent and long space heating interruption will happen)

when selecting [6‑0D]=0 ([A.4.1] Domestic hot water

Type=Reheat only).

5.2.7 Contact/helpdesk number

# Code Description

[6.3.2] N/A Number that users can call in case of

problems.