Philips GC9140 [7/108] English

Philips GC9140 [7/108] English
 Filling opening
 Supply hose storage compartment
 Cord rewind button
 Storage compartment for mains cord
 Mains cord
 Calc Clean tank emptying button
 Calc Clean tank with light
 Steam generator
 Supply hose storage bracket
 Supply hose storage groove
 Carry lock slide
 Carry lock
 On/off knob
 Steam selection buttons with lights (high, medium and ECO steam settings)
 ’Water tank empty’ light
 Automatic shut-off light
 Auto Calc Clean light


 Ergonomic board height (Fig. 2)
Set the ironing board to the correct height. When you stand, the distance between your elbow and
the ironing board has to be approximately 27cm. You can use the heat-resistant iron resting mat as a
guide.
 Ergonomic iron design (Fig. 3)
The upward sloping handle ensures a comfortable position of the wrist.
 Ergonomic iron resting mat (Fig. 4)
The iron resting mat allows you to place your iron horizontally on the ironing board.

1 Place the steam generator on a stable and level surface, i.e. on the hard part of the ironing
board or on a table.
2 Remove the water tank from the appliance (Fig. 5).
3 Fill the water tank to the maximum level. (Fig. 6)
Note: The ‘water tank empty’ light ashes if the water tank is empty.
Do not put hot water, perfume, vinegar, starch, descaling agents, ironing aids or other chemicals in
the water tank.
Note: Empty the Calc Clean tank if there is water in it. See chapter ‘Auto Calc Clean function’.
4 Slide the carry lock slide to the left to unlock the iron and take the iron off the steam
generator (Fig. 7).
5 Take the heat-resistant iron resting mat off the steam generator. (Fig. 8)
6 Place the heat-resistant iron resting mat on the ironing board and put the iron on it (Fig. 9).
Note: You can safely put the hot iron on the mat during ironing
7 To iron with steam, set the temperature dial to 2 or higher. (Fig. 10)
8 Put the plug in an earthed wall socket (Fig. 11).
- Set the on/off knob to ‘on’. (Fig. 12)
 7
Скачать