Metabo GE 710 Plus [17/20] Technical specifications
Макгруп McGrp.ru
Задайте вопрос
Зарегистрироваться

Metabo GE 710 Plus [17/20] Technical specifications

Metabo GE 710 Compact [17/20] Technical specifications
15
Only for EU countries: Never dispose of
power tools in your household waste! In
accordance with European Directive 2002/
96/EC on used electronic and electric equipment
and its implementation in national legal systems,
used power tools must be collected separately and
handed in for environmentally compatible recycling.
Special instructions for cordless machines:
Battery packs must not be disposed of with regular
waste. Return faulty or used battery packs to your
Metabo dealer!
Do not allow battery packs to come into contact with
water!
Before disposal, discharge the battery pack in the
power tool. Prevent the contacts from short-
circuiting (e. g. by protecting them with adhesive
tape).
Explanation of details on page 3. Subject to
changes serving technical progress.
U =Voltage of battery pack
S =Spindle lock for easy tool changes
n =No-load speed (maximum speed)
n
1
=On-load speed
P
1
=Nominal power input
P
2
=Power output
D
max
=maximum grinding wheel diameter
d =Collet bore of the collet chuck
m =Weight with smallest battery pack/weight
without cord
Measured values determined in conformity with
EN 60745.
Machine in protection class II
~ Alternating current
Direct current
The technical specifications quoted are subject to
tolerances (in compliance with the relevant valid
standards).
Emission values
Using these values, you can estimate the
emissions from this power tool and compare these
with the values emitted by other power tools. The
actual values may be higher or lower, depending on
the particular application and the condition of the
tool or power tool. In estimating the values, you
should also include work breaks and periods of low
use. Based on the estimated emission values,
specify protective measures for the user - for
example, any organisational steps that must be put
in place.
Vibration total value
(vector sum of three directions)
determined in accordance with EN 60745:
a
h, SG
= Vibration emission value
K
h,SG
= Uncertainty (vibration)
U
M
=Unbalance
Typical A-effective perceived sound levels
:
L
pA
= Sound pressure level
L
WA
= Acoustic power level
K
pA
, K
WA
= Uncertainty
During operation the noise level can exceed
80 dB(A).
Wear ear protectors!
13. Technical Specifications
Electromagnetic disturbances:
In individual cases, the speed may fluctuate
temporarily if the machine is exposed to extreme
external electromagnetic disturbances or the
electronic restart protection may respond. In this
case, switch the machine off and on again.
IP4345_GA 18 LTX_05_121219.indd a15IP4345_GA 18 LTX_05_121219.indd a15 2012-12-19 14:32:592012-12-19 14:32:59

Содержание

Похожие устройства

Скачать