Home
Главная
Philips
Парогенератор
GC8640
Инструкция по эксплуатации Страница: 20

Philips GC8640 Инструкция по эксплуатации онлайн [20/308] 70310

9 Specictypesonly:Carrythesteamgeneratorby

holdingitbythehandleoftheironwithonehandand

supporting the bottom with the other hand.

This only applies to types with carry lock.



This chapter summarises the most common problems you

could encounter with the appliance. If you are unable to

solve the problem with the information below, contact the

Consumer Care Centre in your country.

Problem Possible cause Solution

Dirty water

and impurities

come out of

the soleplate or

the soleplate is

dirty.

Impurities or chemicals

present in the water have

deposited in the steam

vents and/or on the

soleplate.

Clean the soleplate with a damp cloth

(see chapter ‘IMPORTANT - DESCAL-

ING’, section ‘Descaling the soleplate of

the iron’).

The ironing

board cover

becomes wet

or there are

water droplets

on the garment

during ironing.

This may be caused by

steam condensing on the

ironing board cover after

a long ironing session.

Replace the ironing board cover if the

foam material has worn out. You can

also add an extra layer of felt mate-

rial under the ironing board cover to

prevent condensation on the ironing

board. You can buy felt in a fabric shop.

You may have an ironing

board cover that is not

designed to cope with

the high steam rate of the

steam generator.

Put an extra layer of felt material under

the ironing board cover to prevent

condensation on the ironing board. You

can buy felt in a fabric shop.

Water droplets

come out of

the soleplate.

The steam that was still

present in the hose has

cooled down and con-

densed into water. This

causes water droplets to

come out of the soleplate.

Point the steam ow away from the

garment for a few seconds.

EnGlish20

Philips GC8640 Инструкция по эксплуатации онлайн [20/308] 70310

Содержание

Похожие устройства