Ergolux ELX-FS02-C31 [8/10] Cleaning and care

• Fan is packed disassembled. Before assembling make sure that all the required parts are

undamaged and included into the set.

• Do not plug in the device before its assembling is ﬁnished.

• Assemble the base : put legs to base holes. Tighten stand tube to stand base. Unscrew

out-joint, put the stand cover and base cover on the stand base, pull the extension pole out then

tighten the out-joint again.

• Place control box ﬁrmly on top of extension pole, tighten screw B.

• Unscrew the blade cap by turning clockwise and rear grill nut by turning counter clockwise and

put both blade cap and rear grill nut off the motor shaft.

• Put rear mesh on motor shaft.

• Secure it with rear mesh nut.

• Slide blades on motor shaft so that claws on motor shaft match the blades slots.

• Screw blade cap on shaft by turning counter clockwise.

• Put front mesh on rear mesh and close clips or screw mesh ring to secure meshs together.

• Adjust the fan vertically by vertical adjustment screw.

• The fan is ready for work.

OPERATION MANUAL

CAUTION: To avoid electroconvulsive shock or ﬁre danger, do not operate fan under the conditions

of increased humidity.

Place fan only onto dry ﬂat unyielding surface.

- “1” For minimum operational speed;

- “2” For medium operational speed;

- “3” For maximum operational speed;

- “0” The fan is switched off; night light off;

- «Х» For night light on;

On the upper part of the motor cover there is oscillating knob. If pressed, it makes the fan cabinet

with blades traverse from side to side. To cancel oscillating mode push oscillating knob upward.

CLEANING AND CARE

• Before cleaning unplug fan ﬁrst.

• Clean front and rear meshs, blades, stand tube and stand base with soft moistened cloth and

wipe dry.

• Do not use abrasive cleansers.

STORAGE

• Clean the unit before taking it away for storage.

• Do not wind the power cord around the unit body.

• Keep the unit away from children in a dry cool place.

FEATURES OF SALES AND RECYCLING

This product doesn't require special conditions of transportation, storage and sales. The product

should be recycled after its useful life. Sales and recycling of products is carried in accordance with

current legislation.

DATE OF MANUFACTURE, WARRANTY AND LIFETIME

The date of manufacture is encoded in the serial number, placed on the bottom side of the