Philips FC8132 [10/116] English

Replacement

The plug must be removed from the socket-outlet before cleaning or maintaining the appliance.



- Replace the dustbag as soon as the dustbag-full indicator has changed colour permanently, i.e.

even when the nozzle is not placed on the floor (Fig. 26).

1 Switch off and unplug the appliance.

2 Pull the cover upwards to open it.

3 Lift the dustbag holder out of the appliance.

Make sure you hold the dustbag upright when you lift it out of the appliance.

4 Pull at the cardboard tag to remove the full dustbag from the holder (Fig. 27).

, When you do this, the dustbag is sealed automatically.

5 Slide the cardboard front of the new dustbag into the two grooves of the dustbag holder as

far as possible. (Fig. 28)

6 Put the dustbag holder back into the vacuum cleaner (Fig. 29).

Note: If no dustbag has been inserted, you cannot close the cover.

7 Push the cover downwards to close it.



Always unplug the appliance before you replace a filter.

Replace the HEPA exhaust filter every 12 months.

- To remove the old filter and place the new filter, follow the instructions for removing and

placing the filters in section ‘Cleaning the HEPA exhaust filter’ in chapter ‘Cleaning and

maintenance’.



- Philips Classic s-bag ® synthetic dustbags are available under type number FC8021.

- Philips Clinic s-bag ® high filtration synthetic dustbags are available under type number FC8022.

- Philips Anti-odour s-bag ® synthetic dustbags are available under type number FC8023.

- Reusable dustbags (some countries only) are available under code number 4322 004 93370.

Note: Please visit www.s-bag.com for more information about the s-bag.

Ordering filters and accessories

- HEPA exhaust filters are available under type number FC8070.

Storage

1 Switch off and unplug the appliance.

2 Press the cord rewind button to rewind the cord (Fig. 30).

3 Put the appliance in upright position. To attach the nozzle to the appliance, insert the ridge on

the nozzle into the storage slot.

Note: To ensure stable storage of the telescopic tube, adjust the tube to the shortest length.

ENGLISH10