Home
Главная
Metabo
Прочее
SKN 50
Инструкция по эксплуатации Страница: 10

Metabo SKN 50 Инструкция по эксплуатации онлайн [10/44] 70470

Metabo SKN 50 Инструкция по эксплуатации онлайн [10/44] 70470

10

Take care to avoid working

pressures over 7 bar and

shots without fasteners in the

magazine.

The SKN 50 features a depth

adjustment (item 6), which

allows for adjusting the depth

the nails are driven in.

A faulty or not properly wor-

king tool must be discon-

nected from the pressurised

air source immediately and

presented to a competent

person for inspection. Dis-

connect tool from air supply

and empty the magazine

during extended work breaks

or when work is completed.

3.2 Tool Safety

Air-powered tackers shall

only be operated and serv-

iced by persons having been

instructed in the operation of

such tools.

Keep out of the reach of

children.

Before every use check to

see that all safety and trig-

gering devices are function-

ing properly. Also check the

tightness of all screws and

nuts. The tool must not be

modiﬁ ed, nor shall any emer-

gency repairs or conversion

be made. Avoid damage or

weakening of the tool. Never

dismount or disable parts

such as the tool’s trigger.

4. Initial Operation

The tool must be discon-

nected from the air supply for

loading its magazine!

By pressing the catch lever

(item 4) the magazine is

unlocked and the magazine

slide (item 7) can be pulled

back. The nails can then

be loaded from the side.

Push magazine slide (item 7)

forward until it engages at the

catch lever.

Turn exhaust deﬂ ector (item 5)

to desired position. Set the

working pressure to the

lowest recommended pres-

sure (5.0 bar). Connection

to the pressurised air source

is made by 6 mm flexible

air hose ﬁ tted with a quick

coupler. Set the tacker,

checked for proper functio-

ning, to the point the fastener

is to be driven and pull the

trigger (item 3).

The SKN 50 is ﬁ tted with a

protecting cap on the contact

trip, to prevent damage when

working planed or otherwise

ﬁ nished surfaces. For special

applications the protecting

cap should be removed.

To access a nail jammed in

the tip, actuate the lever on

the side of the service shutter

(item 8) to open it, then

remove jammed nail.

Increase or decrease the

working pressure in 0.5 bar

increments, until the desired

result is achieved. The tacker

should be operated at the

lowest pressure possible.

3.3 Work Safety

Never aim an operable tacker

against yourself or other

persons. When working,

hold the tacker in such way

that your head and body will

not be injured in the event

of possible recoil. Never pull

the trigger with the nozzle

in the air.

When the tacker is operable,

carry it at the handle only and

never with the trigger pulled.

When working, take care

that fasteners are not shot

through thin material and

do not slide off at corners

or edges.

Always wear safety glasses

and hearing protection when

working with a tacker.

5. Care and Maintenance

5.1 Care

Observing the maintenance

instructions given here en-

sures a long service life and

trouble-free operation of this

quality product. Always dis-

connect from the pressurised

air supply when servicing.

For a lasting, trouble-free

operation daily cleaning

and periodic lubrication is

in-dispensable. Use only

special pneumatic oil (see

chapter „Accessories“).

Содержание

Похожие устройства