Philips HD9225 [9/156] English



Note: If you want, you can also let the appliance preheat without any ingredients inside. In that case, turn

the timer knob to more than 3 minutes and wait until the heating-up light goes out (after approx. 3

minutes). Then ll the basket and turn the timer knob to the required preparation time.

, The power-on light and the heating-up light go on. (Fig. 10)

, The timer starts counting down the set preparation time.

, During the hot air frying process, the heating-up light comes on and goes out from time to

time. This indicates that the heating element is switched on and off to maintain the set

temperature.

pull the pan out of the appliance, place it on a heat-resistant surface and press the basket release

button.

Tip: If you set the timer to half the preparation time, you hear the timer bell when you have to shake the

ingredients. However, this means that you have to set the timer again to the remaining preparation time

after shaking.

9 When you hear the timer bell, the set preparation time has elapsed. Pull the pan out of the

appliance and place it on a heat-resistant surface.

Note: You can also switch off the appliance manually. To do this, turn the temperature control knob

to 0 (Fig. 13).

10 Check if the ingredients are ready.

After hot air frying, the pan and the ingredients are hot. Depending on the type of ingredients in

the airfryer, steam may escape from the pan.

12 Empty the basket into a bowl or onto a plate. (Fig. 15)

Tip: To remove large or fragile ingredients, use a pair of tongs to lift the ingredients out of the

basket (Fig. 16).

13 When a batch of ingredients is ready, the airfryer is instantly ready for preparing another

batch.

Settings

This table below helps you to select the basic settings for the ingredients you want to prepare.

Note: Keep in mind that these settings are indications. As ingredients differ in origin, size, shape as well as