Philips HD7446 [8/140] English



1 Open the lid (Fig. 3).

2 Fill the water tank with cold fresh water and put the jug in

place (Fig. 4).

Do not put a lter and ground coffee in the lter holder.

3 Press the on/off switch to switch on the appliance. (Fig. 5)

, The power-on light goes on (HD7448 only).

Let the appliance run until the water tank is empty.

4 Switch off the appliance when all the water is in the jug.

5 Let the appliance cool down for at least 3 minutes before you start

to brew coffee.





1 Open the lid (Fig. 3).

2 Fill the water tank with fresh cold water (Fig. 6).

- The graduations on the left are for large cups (120ml).

- The graduations on the right are for small cups (80ml).

3 Close the lid.

4 Place the jug on the hotplate.

Make sure you place the jug properly on the hotplate.

Note: If you do not place the jug properly on the hotplate, the drip

stop prevents the coffee from owing into the jug and the lter. As a result,

the lter may overow.

5 Open the lter holder (Fig. 7).

6 Take a paper lter (type 1x4 or no. 4) and fold the sealed edges to

prevent tearing and folding.

In some countries, this coffee maker comes with a permanent lter. In

that case, do not use paper lters.

8

4222.001.9933.4.indd 8 19-10-09 09:49