Vitek VT-3457 [5/6] English русский
![Vitek VT-3457 [5/6] English русский](/views2/1007635/page5/bg5.png)
8
GENERAL
1. Once the required station has been located, adjust the VOLUME controls to the desired levels.
2. Select the BASS BOOST switch to ON to get the rich bass sound. To turn it off, select the BASS BOOST switch to OFF
position.
USING THE CASSETTE
NORMAL PLAYBACK
1. Switch the function selector to TAPE,
2. Press the STOP/EJECT key to open the cassette compartment and insert a prerecorded tape, with the exposed por?
tion of the tape upwards and the full spool on the right Gently push the door to close.
3. Press the PLAY key to start playback.
4. Adjust VOLUME control to the desired levels.
5. To briefly suspend playback press the PAUSE key, releasing R resumes playback.
6. To advance or rewind the tape rapidly use the FAST FORWARD or REWIND keys.
7. To stop playback press the STOP/EJECT key press it fully down to eject the cassette.
Note: When the cassette reaches it's end during playback or recording, the mechanism will stop and the keys return to
their normal positions.
RECORDING
Please note Chrome or Metal tapes are not recommended for use in this product.
1. Select desired function (CD or RADIO) or TAPE for voice recording via internal condenser microphone.
2. Insert a blank tape with recording tabs intact into the cassette compartment.
3. Operate the desired function and select the material to be recorded.
4. Press RECORD key, the PLAY key will automatically engage.
5. The product has a built?in ALC circuit, which automatically adjusts the record level for quality recording.
6. To temporarily stop or edit the recording press the PAUSE button.
7. To stop recording press the STOP/EJECT button.
RECORDING FROM CD
1. Set the Function Selector to the CD position.
2. Press the Record Key and the Play Key at the same time.
3. Press the CD Play/Pause button.
4. To stop recording, press the Stop button of CD player. Then press the Stop/Eject key of the cassette deck.
USING THE CD PLAYER
1. Switch the function selector to CD.
2. Lift up the CD lid at OPEN/CLOSE indication and insert a disc with the label being uppermost. Close the lid. (Ensure
the disc is correctly mounted on the spindle and locked in place)
3. After a few seconds, the product will scan the disc and the display will show the total number of tracks o n the disc. If
the disc is incorrectly inserted or defective the display will show "??".
4. Press PLAY/PAUSE to start playback adjust VOLUME control to desired levels. Current track being played will be
shown in the display.
5. To temporarily pause playback press the PLAY/PAUSE button the play Indicator flashes in the display. To resume play?
back press this button again.
6. To stop playback press the STOP button. The display will show the total number of tracks on the display. This remains
in the display until either the disc is removed or another function is selected.
7. To skip up or down tracks on the disc use either !or" skip button.
Note: CD?R/CD?RW can be playable.
REPEAT PLAY
1. To repeat the track currently being played press the REPEAT button once. "REP" will show in the display.
2. To repeat the entire disc (continuous play) press the REPEAT button twice. "REP" A" will snow in the display.
3. To return to normal play mode press REPEAT button until "REP. A" disappears from the display.
PROGRAMME PLAY
Up to 20 tracks can be programmed for playback in any desired order.
1. Ensure CD is in the stop mode.
2. Press the PROGRAM button, "PROG" and "00" will show in the display and flash.
3. Using the SKIP buttons !or" select the First track to be memorized.
4. Press the PROGRAM button. This track is now placed in the memory.
5. Repeat the above process up to a maximum of 20 tracks. If more than 20 tracks are entered, "PROG" and "??" will flash
in the display to indicate the program is full and no further tracks should be entered.
6. To play the programmed selection press the PLAY/PAUSE button.
7. To cancel Programmer play and resume normal playback, press the STOP button at program mode.
5
ENGLISHРУССКИЙ
3457.qxd 15.08.03 17:19 Page 10
Содержание
- Manual instruction инструкция по эксплуатации 1
- Модель vt 3457 1
- Caution 2
- Caution hazardous laser radiation when open and interlock defeated 2
- Caution to reduce the risk of electric shock do not remove cover or back no user ser viceable parts inside refer servicing to qualified service personnel 2
- Danger invisible laser radiation when open and inter lock failed or defeated avoid direct posure to beam 2
- English 2
- Qxd 15 8 3 17 19 page 4 2
- Risk of electric shock do not open 2
- Warning to reduce the risk of fire or electric shock do not expose this appliance to rain or moisture 2
- Русский 2
- English 3
- Qxd 15 8 3 17 19 page 6 3
- Русский 3
- English 4
- Qxd 15 8 3 17 19 page 8 4
- Русский 4
- English русский 5
- Qxd 15 8 3 17 19 page 10 5
- Qxd 15 8 3 17 19 page 12 6
- Во избежание поражения электрическим током не снимайте заднюю крышку внутри аппарата нет деталей требующих обслуживания пользователем обслуживание должно выполняться квалифицированными специалистами 6
- Графические символы нанесенные на задней панели прибора имеют следующее значение 6
- Инструкция по эксплуатации содержит важные рекомендации которых следует придерживаться для вашей безопасности 6
- Не открывать опасность лазерного излучения 6
- Опасное напряжение внутри прибора которое может служить причиной электрического удара 6
- Осторожно риск электрического удара не открывать 6
- Русский english 6
- Уважаемый покупатель чтобы ваша магнитола служила максимально долго обратите внимание на следующие правила пользования перед включением прибора в сеть проверьте соответствует ли напряжение указанное на магнитоле напряжению в вашем доме при подключении сетевого шнура к штекеру расположенному на задней стенке аппарата вилка должна быть выключена из розетки необходимо строго соблюдать последовательность подключения к сети 220в а подключить сетевой шнур к аппарату б подсоединить шнур к сети 220в при несоблюдении последовательности трансформатор может выйти из строя при выключении сетевого шнура из розетки держитесь не за шнур а за вилку если ваша магнитола оснащена переключателем напряжения установите его в правильное положение при установке переключателя в положение не соответствующее напряжению сети аппарат может выйти из строя если система долгое время не используется отключите ее от электросети при длительном неиспользовании аппарата извлеките батарейки из отсека не устанавливайте сист 6
Похожие устройства
- JJ-Connect Autonavigator 5000 WIDE Инструкция по эксплуатации
- A4Tech HSP-100U Инструкция по эксплуатации
- Bosch PRP 626 B90E Инструкция по эксплуатации
- Lexicon ALPHA Инструкция по эксплуатации
- Sturm MS5525N Инструкция по эксплуатации
- Vitek VT-3456 Инструкция по эксплуатации
- JJ-Connect AutoNavigator 4100W Traffic Инструкция по эксплуатации
- JBL GTO-938 Инструкция по эксплуатации
- A4Tech HSB-100U Инструкция по эксплуатации
- Lexicon OMEGA Инструкция по эксплуатации
- Энкор Корвет-4М 23201 Инструкция по эксплуатации
- Bosch PCD 345 D Инструкция по эксплуатации
- Vitek VT-3455 Инструкция по эксплуатации
- JBL GTO628 Инструкция по эксплуатации
- A4Tech X-738K Инструкция по эксплуатации
- Sparky TKN 95D Инструкция по эксплуатации
- Lexicon MPX200 Инструкция по эксплуатации
- Bosch PKF645R14E Инструкция по эксплуатации
- JBL GTO-8628 Инструкция по эксплуатации
- Vitek VT-3454 Инструкция по эксплуатации
Скачать
Случайные обсуждения
Ответы 0
Где взять утеряную пружину от крышки, которая прижимает катушкой диск или чем заменить?
3 года назад