Daikin FH35BVE [12/16] How to clean air outlet and out side panels
![Daikin FH35BVE [12/16] How to clean air outlet and out side panels](/views2/1764313/page12/bgc.png)
9 English
4. Fix the air filter.
Set the hatch of the air filter to the fook of the
suction grille, and fix the air filter.
(Refer to Fig. 5)
5. Close the suction grille.
Refer to item No. 1.
6. After turning on the power, press FILTER
SIGN RESET button.
The “TIME TO CLEAN AIR FILTER” display van-
ishes.
HOW TO CLEAN AIR OUTLET AND OUT-
SIDE PANELS
• Clean with soft cloth.
• When it is difficult to remove stains, use water or
neutral detergent.
• When the flap is extremely contaminated, remove
it as below and clean or exchange it.
(Flap for exchange is optional)
NOTE
• Do not use gasoline, benzene, thinner, polishing
powder, liquid insecticide. It may cause discolor-
ing or warping.
• Do not let the indoor unit get wet. It may cause an
electric shock or a fire.
• Do not scrub firmly when washing the blade with
water.
The surface sealing may peel off.
• Do not use water or air of 50°C or higher for clean-
ing air filters and outside panels.
HOW TO CLEAN THE SUCTION GRILLE
1. Open the suction grille.
Slide both knobs and then pull them downward.
(Do the same procedure for closing.)
2. Remove the air filter.
Refer to “HOW TO CLEAN THE AIR FILTER”.
(Refer to Fig. 2)
3. Remove the suction grille.
Open the suction grille and pull the knob on the
back of the suction grille forward. (Refer to Fig 4)
4. Clean the suction grille.
Wash with a soft bristle
brush and neutral deter-
gent or water, and dry
throughly.
• When very grimy
Directly apply the type of detergent used for
cleaning ventilation fans or ovens, wait 10 min-
utes, and then rinse with water.
NOTE
• Do not wash the air conditioner with hot water of
more than 50°C, as doing so may result in discol-
oration and/or deformation.
5. Fix the air filter.
Refer to “HOW TO CLEAN THE AIR FILTER ”.
6. Fix the suction grille.
Refer to item No. 2.
7. Close the suction grille.
Refer to item No. 1.
START UP AFTER A LONG STOP
Confirm the following
• Check that the air inlet and outlet are not blocked.
Remove any obstacle.
• Check if the earth is connected.
Might there be a broken wire somewhere?
Contact your dealer if there are any problems.
Clean the air filter and outside panels
• After cleaning the air filter, make sure to attach it.
Turn on the main power supply switch
• The display on the remote controller will be shown
when the power is turned on.
• To protect the unit, turn on the main power switch
at least 6 hours before operation.
WHAT TO DO WHEN STOPPING THE SYS-
TEM FOR A LONG PERIOD
Turn on FAN OPERATION for a half day and dry
the unit.
• Refer to “FAN OPERATION”.
Cut off the power supply.
• When the main power switch is turned on, some
watts of electricity is being used even if the sys-
tem is not operating.
Turn off the main power supply switch for saving
energy.
• The display on the remote controller will vanish
when the main power switch is turned off.
Clean the air filter and the exterior.
• Be sure to replace the air filter to its original place
after cleaning. Refer to “MAINTENANCE”.
01_EN_3P170549-4.fm Page 9 Friday, December 9, 2005 11:49 AM
Содержание
- Operation manual 1
- Split system air conditioner 1
- 16 17 18 3
- Contents 4
- Indoor unit 4
- Names and functions of parts 4
- Outdoor unit 4
- Precautions for group control system or two remote controller control system 4
- Unit with remote controller 4
- Unit without remote controller when used as simultaneous operation system 4
- What to do before opera tion 4
- What to do before operation 4
- Safety considerations 5
- Operation range 6
- And display on the remote controller 7
- Installation site 7
- Name and function of each switc 7
- Name and function of each switch and display on the remote controller 7
- Pay attention to running noises too 7
- Regarding drainage of drain piping 7
- Regarding places for installation 7
- Regarding wiring 7
- Cooling heating automatic fan and program dry operation 8
- Inspection test operation button 8
- On off 8
- Operation mode selec tor 8
- Operation procedure 8
- Press on off button 8
- Press operation mode selector but ton several times and select the opera tion mode of your choice as follows 8
- A up and down direction 9
- Adjustment 9
- Air flow direction adjust 9
- B left and right direction 9
- Explanation of heating operation 9
- Fan speed control 9
- Press fan speed control button 9
- Press temperature setting button and program the setting temperature 9
- Press the air flow direction adjust button to select the air direction as shown below 9
- Regarding outside air temperature and heat ing capacity 9
- Temperature setting 9
- B left and right direction 10
- Movement of the air flow flap 10
- Optimum operation 10
- Press the programming time button and set the time for stopping or starting the system 10
- Press the timer mode start stop button several times and select the mode on the display 10
- Press the timer on off button 10
- Program timer operation 10
- Programming time 10
- Timer mode start stop 10
- Timer on off 10
- How to clean the air filter 11
- Important 11
- Maintenance for service personnel 11
- Turn off the main power supply switch when it is not used for long periods of time when the main power switch is turned on some watts of electricity is being used even if the system is not operating turn off the main power supply switch for saving energy when reoperating turn on the main power supply switch 6hours before operation for smooth running refer to maintenance 11
- How to clean air outlet and out side panels 12
- How to clean the suction grille 12
- Open the suction grille and pull the knob on the back of the suction grille forward refer to fig 4 12
- Start up after a long stop 12
- What to do when stopping the sys tem for a long period 12
- Not malfunction of the air conditioner 13
- The system does not restart immediately when tempera ture setting button is returned to the former position after pushing the button 13
- Indoor unit no in which a malfunction occurs 14
- Inspection display 14
- Malfunction code 14
- Operation lamp 14
- Trouble shooting 14
- English 12 15
- Specifications 15
- These specifications are in compliance with saso386 15
Похожие устройства
- Daikin FH35BVE Инструкция по эксплуатации
- Daikin FH50BVE Руководство по эксплуатации
- Daikin FH50BVE Инструкция по эксплуатации
- Daikin FH60BVE Руководство по эксплуатации
- Daikin FH60BVE Инструкция по эксплуатации
- Daikin FH71BVE Руководство по эксплуатации
- Daikin FH71BVE Инструкция по эксплуатации
- Daikin FH6100BVE Руководство по эксплуатации
- Daikin FH6100BVE Инструкция по эксплуатации
- Daikin FH125BVE Руководство по эксплуатации
- Daikin FH125BVE Инструкция по эксплуатации
- Daikin FHY50BVE Руководство по эксплуатации
- Daikin FHY50BVE Инструкция по эксплуатации
- Daikin FHY60BVE Руководство по эксплуатации
- Daikin FHY60BVE Инструкция по эксплуатации
- Daikin FHY71BVE Руководство по эксплуатации
- Daikin FHY71BVE Инструкция по эксплуатации
- Daikin FHY100BVE Руководство по эксплуатации
- Daikin FHY100BVE Инструкция по эксплуатации
- Daikin FHY125BVE Руководство по эксплуатации