Candy CDNE 3760 [7/32] Reversing the opening of the doors

7 EN

Place the appliance on the floor or at a 45° angle,

since it is necessary to work on the bottom of the

appliance.

Take off the bottom right-hand hinge by removing

the screws, pin and washers, then remove the

lower door.

Mark and break the left-hand slot on the panel, in

the insert area.

Take the top left-hand hinge from the accessories

kit and fasten it.

Fit the panel, and secure with the screws and

caps.

To reverse the handles: remove the outer caps

from the right-hand side of the doors.

Remount the hinges and doors working from

bottom to top,

Unscrew the handles from the left-hand side and

move them to the right-hand side, then position

the outer caps on the left-hand side of the doors.

Remove the lower plinth by pulling out the 3

protective plugs and by loosening the screws.

Remove the caps (A) and (B), loosen the screws

and partially remove the panel.

Unscrew the right hinge.

Drill the plinth on the marked left hand-side area.

Put the appliance in an upright position and wait

two hours before turning it on.

2 Hours

In order to reverse the opening of the doors, follow the indications in relation to the insert and hinge type your product is made up of.

REVERSING THE OPENING OF THE DOORS