Vitek VT-3455 [6/16] English
Макгруп McGrp.ru
Задайте вопрос
Зарегистрироваться

Vitek VT-3455 [6/16] English

Vitek VT-3455 [6/16] English
USING THE CD PLAYER
1. Switch the function selector to CD.
2. Press the OPEN button and insert a disc with the label facing uppermost. Close the lid.
3. After a few seconds, the product will scan the disc and the display will show the total
number of tracks on the disc. If the disc is incorrectly inserted or defective the display will
show “00” and go blank.
4. Press PLAY/PAUSE or start playback adjust VOLUME and BBS controls to desired level.
Current track being played will be shown in the display.
5. To temporarily pause playback press the PLAY/PAUSE button. “II” shows in the display.
To resume playback press this button again.
6. To stop playback press the STOP button. The display will show the total number of
tracks on the disc. This remains in the display until either the disc is removed or another
function is selected.
7. To skip up or down tracks on the disc use either “ >>l ” or “ l<< ” skip button.
REPEAT PLAY
1. To repeat the track currently being played press the REPEAT button once. The
“ ” indicator will flash continuously in the display.
2. To repeat the entire disc (continuous play) press REPEAT button twice. The
“ All ” indicator will light up in the display.
To return to normal play mode press REPEAT button until ‘Repeat’ indicator
disappears from the display, or press the STOP button.
Playing A MP3 Disc
1. MP3 indicator appears (Track Number and Title) on the LCD display.
2. The player will start playing after TOC reading.
3. Select Track
– Press the Digi button once, twice, or thirdly and digit representing hundredth, tenth,
or first number position will flash respectively.
– Press the skip up/down button to select your digits accordingly during flashing.
4. After selected your desired track, press “ PLAY ” button.
Important Notes:
• This player not responsible for playability of MP3/CD-RW/CD-R discs in any case due to
recording condition such as PC performance, writing software, media ability or etc.
This symbol means that this unit is double insulated.
An earth connection is not required.
CAUTION: WHEN OPERATING THIS UNIT ON 230 V MAINS SUPPLY, PLEASE NOTE
THAT WHEN THE POWER SWITCH IS IN THE OFF MODE. THIS DOES NOT DIS-
CONNECT THE UNIT FROM THE MAINS SUPPLY, HOWEVER, PLEASE BE
ASSURED THAT IT IS PERFECTLY SAFE TO LEAVE THE UNIT CONNECTED TO THE
MAINS SUPPLY.
CAUTION CLEANING: Always disconnect the unit from mains supply before
attempting to clean it. Use soft cloth moistened with soapy water, wipe gently.
Do not use solvents or abrasive materials.
* Save the carton and packing materials; they will be useful if you ever have to
transport the unit.
5
ENGLISH
3455.qxd 16.09.2004 13:02 Page 5

Содержание

Похожие устройства

Скачать