Beko ORE27205C [15/92] Future transportation

Содержание

DANGER I The power cable must not be clamped bent or Arapped or come into contact with hot parts of the product A damaged power cable must be replaced by a qualified electrician Otherwise there is risk of electric shock short circuit or fire the instructions and if the screws are not sufficiently tightened For products with cooling fan This may not exist on your product Connection must comply with national regulations The mains supply data must correspond to the data specified on the type label of the product Open the front door to see the type label Power cable of your product must comply with the values in Technical specifications table DANGER H Before starting any work on the electrical installation disconnect the product from the mains supply There is the risk of electric shock BPower cable plug must be within easy reach J latter installation do not route it above the 1 2 3 Cooling fan Control panel Door The built in cooling fan cools both the built in cabinet AJhob g wWhile performing the wiring you must apply Iwith the national local electrical regulations must use the appropriate socket outlet line and plug for oven In case of the product s power limits are out of current carrying capability of plug and socket outlet line the product must be connected through fixed electrical installation directly without using plug and socket outlet line Plug the power cable into the socket Installing the product 1 Slide the oven into the cabinet align and secure it while making sure that the power cable is not broken and or trapped Cooling fan continues to operate for about 2030 minutes after the oven is switched off If you have cooked by programming the timer of the oven cooling fan will also be switched off at the end of the cooking time together with all functions Final check 1 Operate the product 2 Check the functions Future Transportation Keep the product s original carton and transport the product in it Follow the instructions on the carton If you do not have the original carton pack the product in bubble wrap or thick cardboard and tape it securely To prevent the wire grill and tray inside the oven from damaging the oven door place a strip of cardboard onto the inside of the oven door that lines up with the position of the trays Tape the oven door to the side walls Do not use the door or handle to lift or move the product ____________________________ Do not place any objects onto the product and move it in upright position Secure the oven with 2 screws as illustrated After the installation make sure that the screws are sufficiently tightened and the oven does not move Oven may tip over during use if it is not installed as per Check the general appearance of your product for any damages that might have occurred during transportation 15 EN

Скачать