Entel HT649 [8/24] Preparing your radio for use

Common

Preparing Your Radio For Use cont...

Attaching / Removing the Aerial

To attach, carefully align the aerial with the

socket. Screw in the aerial clockwise (taking

care not to cross the thread) until it is seated

firmly against the top of the radio.

To remove, unscrew the aerial

anti-clockwise.

Attaching / Removing Audio Accessories

To attach, remove the accessory cover by unscrewing

the locking screw anti-clockwise (leave cover attached

or store in a safe place). Attach accessory plug by

locating over the socket. Carefully tighten the locking

screw clockwise until finger tight (do not tighten with a

screwdriver etc).

To remove, unscrew the locking screw by hand in an

anti-clockwise direction (carefully use a coin or

screwdriver if too tight). Ensure you re-fit the

accessory cover so as to protect the socket.

Attaching / Removing the Belt Clip

To attach, locate the clip into the slot on

the back of the battery and slide up until

you hear a “click”.

To remove, pull the tab (a) towards the

belt clip. Then slide the belt clip

downwards (b)

Charging Your Radio

Several charger options are available. Please refer to your charger user guide.