Entel HT916 [8/25] Preparing your radio for use

Common

Preparing Your Radio For Use cont...

Attaching / Removing the Aerial

1 To attach, carefully align the aerial with the

socket. Screw in the aerial clockwise (taking

care not to cross the thread) until it is seated

firmly with the accessory cover’s rubber ring

between the aerial & the the top of the radio.

2 To remove, unscrew the aerial anti-clockwise.

Attaching / Removing Audio Accessories

3 To attach, remove the accessory cover by unscrewing the

locking screw anti-clockwise (leave cover secured under

antenna as this provides a waterproof seal). Attach accessory

plug by locating over the socket. Carefully tighten the locking

screw clockwise until finger tight (do not tighten with a

screwdriver etc).

4 To remove, unscrew accessory plug the locking screw by

hand in an anti-clockwise direction (carefully use a coin or

screwdriver if too tight). Ensure you re-fit the accessory

waterproof cover so as to protect the accessory socket.

Charging Your Radio

Several charger options are available.

Please refer to your charger user guide.

Turning your radio on

Turn your radio on by pressing the on / off button on the front of the radio. The radio will bleep and

the LED will illuminate constant yellow for approximately 4 seconds, followed by a second “warble” (if

not disabled by the Dealer when programmed).

HT9X2