Asus PRIME B450-PLUS [12/30] Ddr4 dimm slots

ASUS PRIME B450-PLUS

1-3

Before you install or remove any component, ensure that the ATX power supply is

switched off or the power cord is detached from the power supply. Failure to do so may

cause severe damage to the motherboard, peripherals, or components.

• Actual lighting and color will vary with LED strip.

• If your LED strip does not light up, check if the RGB LED extension cable and the

RGB LED strip is connected in the correct orientation, and the 12V connector is

aligned with the 12V header on the motherboard.

• The LED strip will only light up when the system is operating.

• The LED strips are purchased separately.

DDR4 DIMM slots

Install 2 GB, 4 GB, 8 GB, and 16 GB unbuffered DDR4 DIMMs into these DIMM sockets.

For more details, refer to System memory.

M.2 socket 3

This socket allows you to install M.2 (NGFF) SSD modules.

M.2(SOCKET3)

2280

22110

2260 2242

• The M.2 socket supports PCIe 3.0 x4 mode and SATA

mode M Key design and type 2242 / 2260 / 2280 / 22110

storage devices.

• The M.2 Socket shares bandwidth with the SATA_5/6

ports, and therefore the SATA_5/6 ports cannot be used

when an M.2 device is installed.

AMD Serial ATA 6.0Gb/s connectors (7-pin SATA6G_1~6)

These connectors connect to Serial ATA 6.0 Gb/s hard disk drives via Serial ATA

6.0 Gb/s signal cables.

System panel connector (20-5 pin F_PANEL)

This connector supports several chassis-mounted functions.

USB 3.1 Gen 1 (up to 5Gbps) connector (20-1 pin U31G1_12)

Connect a USB 3.1 Gen 1 module to this connector for additional USB 3.1

Gen 1 front or rear panel ports. This connector complies with USB 3.1 Gen 1

specications and provides faster data transfer speeds of up to 5 Gbps, faster

charging time for USB-chargeable devices, optimized power efciency, and

backward compatibility with USB 2.0.

USB 2.0 connectors (10-1 pin USB34,USB56)

Connect a USB module cable to any of these connectors, then install the module

to a slot opening at the back of the system chassis. These USB connectors comply

with USB 2.0 specications and support up to 480Mbps connection speed.