Candy CCVB 60D/1 Инструкция по эксплуатации онлайн [8/131] 599768

OPERATING YOUR WINE COOLER/BEVERAGE COOLER

AND SETTING THE TEMPERATURE CONTROL

 Control System Instruction

• “

” Button

To control this appliance turn on/off ( press and hold this buttons for approximately

3 seconds).

• “

” Button

To control the inner light turn on/off.

• “

” Button

Used to raise(warm) the temperature in 1℉（1℃）.

• “

” Button

Used to lower(cool) the temperature in 1℉（1℃）.

• “ο”

Indicator light illuminates to signify the cooling mode is currently in operation.

• “DISPLAY”

To shows the temperature of the set temperature.

 Setting The Temperature Controls

Set the desired cooling temperature by pressing the buttons adjacent to the " " or " "

indicators. Each press of the buttons will scroll through the available temperature settings in

increments of 1°C.

The temperature setting can be adjusted from 5℃ to 18℃.

If you want to reveal every indoor actual temperature, please press and hold the " " or

" " button for 3 seconds, the LED will flash and display the actual temperature. After

stopping pressing the button for 5 seconds, LED figure will stop flash, then revert back to display

the set temperature.

Flashing LED = Cabinet temperature

Steady LED = Set temperature

 Temperature Alar

If the temperature inside is higher than 23 ℃, it will display "HI" on the display panel, and after one

hour after the alarm / buzzer will sound. This indicates that the temperature inside is too high. If the

temperature inside is lower than 0 ℃, it will display "LO" on the display panel and at the same time

the alarm also malfunction indicator is active