Daikin CDXS35EAVMA [294/456] Name and function of each switch and display on the remote control
Макгруп McGrp.ru
Задайте вопрос
Зарегистрироваться

Daikin CDXS35EAVMA [294/456] Name and function of each switch and display on the remote control

Daikin CDXS35EAVMA [294/456] Name and function of each switch and display on the remote control
SiEN18-622 Ceiling Mounted Cassette Type
System Configuration 282
Refer to figure 1 on page [1]
The illustrations in this operating manual correspond to the
remote control format BRC1C type. Although the display
and shape of the buttons on the BRC1B type are slightly
different, they may be operated in the same manner.
Refer to figure 1 on page [1]
• Operating procedure varies with heat pump type and
cooling only type. Contact your Daikin dealer to confirm
your system type.
• to protect the unit, turn on the main power switch 6 hours
before operation.
• If the main power supply is turned off during operation,
operation will restart automatically after the power turns
back on again.
5. Name and function of each switch and display
on the remote control
1
ON/OFF BUTTON
Press the button and the system will start. Press
the button again and the system will stop.
2
OPERATION LAMP (RED)
The lamp lightsup during operation.
3
DISPLAY “” (UNDER CENTRAL-
IZED CONTROL)
When this display shows, the system is
UNDER CENTRALIZED CONTROL.
4
DISPLAY “”“”“ ”“”“”
(OPERATION MODE)
This display shows the current OPERATION
MODE. For cooling only type, “” (Auto)
and “” (Heating) are not installed.
5
DISPLAY “
TEST
” (INSPECTION/TEST
OPERATION)
When the INSPECTION/TEST OPERATION
BUTTON is pressed, the display shows the
system mode is in.
6
DISPLAY “” (PROGRAMMED TIME)
This display shows the PROGRAMMED
TIME of the system start or stop.
7
DISPLAY “” (SET TEMPERATURE)
This display shows the set temperature.
8
DISPLAY “” (FAN SPEED)
This display show
s the set fan speed.
9
DISPLAY “” (TIME TO CLEAN AIR FIL-
TER)
Refer to “HOW TO CLEAN THE AIR FILTER”.
10
DISPLAY “” (DEFROST)
Refer to “DEFROST OPERATION”.
hr
hr
C
6. Operation procedure
11
NON-FUNCTIONING DISPLAY
If that particular function is not available,
pressing the button may display the words
“NOT AVAILABLE” for a few seconds.
When running multiple unitssimultaneously
the “NOT AVAILABLE” message will only
appear if none of the indoor units is equipped
with the function. If even one unit is equipped
with the function, the display will not appear.
12
TIMER MODE
START/STOP BUTTON
Refer to “PROGRAM TIMER OPERATION”.
13
TIMER ON/OFF BUTTON
Refer to “PROGRAM TIMER OPERATION”.
14
INSPECTION/TEST OPERATION BUTTON
Thisbutton isused only by qualified service
persons for maintenance purposes.
15
PROGRAMMING TIME BUTTON
Use thisbutton for programming “START and/
or STOP” time.
16
TEMPERATURE SETTING BUTTON
Use thisbutton for SETTING TEMPERA-
TURE.
17
FILTER SIGN RESET BUTTON
Refer to “HOW TO CLEAN THE AIR FILTER”.
18
FAN SPEED CONTROL BUTTON
Press thisbutton to select the fan speed,
HIGH or LOW, of your choice.
19
OPERATION MODE SELECTOR BUTTON
Press thisbutton to select OPERATION
MODE.
NOTE
• For the sake of explanation, all indicationsare
shown on the display in figure 1 contrary to
actual running situations.

Содержание

Похожие устройства

Скачать