Denzel CDL-IB-14-02 (26112) [11/28] Cordless drill driver
Макгруп McGrp.ru
Задайте вопрос
Зарегистрироваться

Denzel CDL-IB-14-02 (26112) [11/28] Cordless drill driver

Denzel CDL-IB-14-02 (26112) [11/28] Cordless drill driver
11
CORDLESS DRILL/DRIVER
EN
MAINTENANCE
ATTENTION!
Before starting maintenance work and setting up the tool disconnect the battery. To ensure
quality and safe functioning keep your tool and vents clean at all times.
– If you have noticed a decrease in the eciency of the tool, extraneous noise or smell then you must contact the
service center for timely diagnosis and repair.
– Tooling maintenance. The use of the worn working tool reduces the eectiveness of the work and may result in
motor or gearbox failure, so you need to sharpen periodically or replace worn removable tools, as soon as there
is a need.
– Electric motor care. You must be especially careful with the electric motor, avoid getting liquids and foreign
objects inside the case. Keep your ventilation holes clean, blow them regularly with compressed air or clean
them with a brush. When noticeable sparks appear, contact an authorized service center for diagnostics and
possibly replacement of carbon brushes.
Possible faults
Fault Probable cause Elimination method
The machine does not turn on,
the charge indicator is not lit.
Low battery. Charge the battery.
Defective switch. Call the service center.
The machine does not turn on,
the charge indicator is lit.
Engine malfunction. Call the service center.
Increased noise in the gearbox. Mode switch not fully turned on. Switch to extreme position.
Worn or broken gearbox. Call the service center.
Flashes in the vents of the case
during operation, the smell of
burning.
Engine malfunction. Call the service center.
Tooling is not xed or removed
from the chuck.
Chuck clogging. Remove the tooling and clean the
chuck with compressed air.
Worn or broken chuck. Call the service center.
The battery is not charging,
indicator is on.
Battery fault. Replace battery.
The battery is not charging, the
lights are o.
Charger malfunction. Call the service center or replace
the charger.
RECYCLING
A tool, developed a designated service life, must be recycled according the rules established by environmental
and other laws of the country, where the tool is operated.
TRANSPORTATION
During the transportation direct exposure of precipitation, direct sunlight, heat and shock is not allowed.
Transportation should be carried out only in the original packaging at ambient temperature from -20 °С to +40 °С.

Содержание

Похожие устройства

Скачать