Denzel EM-1-1600 (27904) [6/28] Construction electric hand mixer

CONSTRUCTION ELECTRIC HAND MIXER

e) Check an electric tool regularly. Check alignment accuracy and ease of movement of moving parts, integrity of

parts and any other elements of the electric tool aecting its work. Do not use a broken electric tool until it is

completely repaired. Most accidents are the result of insucient maintenance of the electric tool.

f) Watch out for sharpness and cleanness of cutting accessories. Sharp-edged accessories allow avoiding jamming

and make work less tiring.

g) Use electric tool and accessories in accordance with this manual and taking into account the working conditions

and nature of future work. Misuse of the electric tool can create a hazardous situation.

Maintenance

Your electric tool must be repaired only by qualied specialists using original spare parts. This will ensure safety

and reliability of your electric tool in further use.

Additional security measures for Electric Hand Mixers

a) Hold the mixer rmly in both hands when working. If this rule is not followed, the operation of the power tool

becomes dangerous.

b) It is prohibited to mix solvents and products containing solvents, since there is a risk of ignition at temperatures

above 21 °C.

с) Hold electrical cable away from the rotating working tool. If you lose control of your electric tool, the power cord

may be cut or captured by a rotating working tool.

d) When jamming the paddle immediately turn o the mixer.

e) Turn the machine on and o only inside the tank with mixed composition, the immobility of which must be

ensured.

f) It is prohibited to put hands into the tank with mixture while working. To avoid equipment breakages do not

put any objects into the tank.

g) During operation immerse the working part of the machine in mixed composition at low speed of rotation of

the paddle in order to avoid splashing of the mixed composition. It is recommended to increase the rotation

speed to the maximum for better engine cooling when the paddles are completely immersed in the mixed

composition. It is recommended to remove the working part of the machine from the mixed composition at

minimum speed.

h) The machine can be released from the hands only after complete stop.

i) Keep the engine in good condition. In case of failure, appearance of suspicious odors characteristic of burning

insulation, strong noise, knocking, sparks you should immediately turn the machine o and contact to the

service center.

Residual risks

Despite following the relevant safety instructions and the use of safety devices some residual risks cannot be

completely eliminated. These include:

•

Injuries from touching moving parts of the tool.

•

Risk of pinching ngers when changing tooling.

•

Damage to health from exposure to vibration arising at work.