Motorola MotoTRBO DM3400 VHF 25 Вт MDM27JNC9JA2AN — emergency Communication Features for Two-Way Radios [22/26]

Превью страниц Страница 22 / 26

Advanced Features

English

4 Press the PTT button to make the call. The green LED lights

up.

5 Wait for the Talk Permit Tone to finish (if enabled) and speak

clearly into the microphone.

6 Long press the preprogrammed Emergency button to exit

the Emergency mode.

Sending an Emergency Alarm with Voice to

This feature allows you to send an Emergency Alarm to another

radio. Upon acknowledgement, your radio’s microphone is

automatically activated, allowing you to communicate with the

other radio without pressing the PTT.

This activated microphone state is also known as “hot mic”.

If you press the PTT button during the preprogrammed hot mic

transmission period, the radio ignores the PTT press and

remains in Emergency mode.

NOTE: If you press the PTT button during hot mic, and

continue to press it after the hot mic duration expires,

the radio continues to transmit until you release the

PTT button.

Procedure:

1 Press the preprogrammed Emergency button or the

Emergency footswitch.

2 The green LED lights up.

3 Once a tone sounds, speak clearly into the microphone.

When hot mic has been enabled, the radio automatically

transmits without a PTT press until the hot mic duration

expires.

4 While transmitting, the green LED lights up.

5 Once the hot mic duration expires, the radio automatically

stops transmitting. To transmit again, press the PTT button.

Reinitiating an Emergency Mode

There are two instances where this can happen:

• You change the channel while the radio is in Emergency

mode. This exits the Emergency mode. If Emergency Alarm is

enabled on this new channel, the radio reinitiates Emergency.

• You press the preprogrammed Emergency button during an

Emergency initiation/transmission state. This causes the

radio to exit this state, and to reinitiate Emergency.



75D05-A.book Page 17 Wednesday, January 3, 2007 12:51 PM