Sinbo SCM 2921 [14/57] Using your coffee maker

- 13 -

USING YOUR COFFEE MAKER

CLEANING AND MAINTENANCE

coffee powder, but you may adjust according to personal taste. Replace the

top cover.

4) Press down the jug lid and turn it clockwise until it can not move any longer.

Then insert the steel vacuum jug on adiabatic plate horizontally.

5) Plug the power cord into the outlet.

6) Turning on the switch, the indicator will be illuminated. The appliance will

begin working. The brewing process can be interrupted by shutting off the

switch at any time. The appliance will continue brewing once the switch is

turned on again.

Note: you can take out jug and open the lid, pour and serve at any time. The

appliance will stop dripping automatically. But the time cannot exceed 30

seconds.

7) Remove out jug to serve when finish brewing (about one minute later after

the coffee stops dripping out.)

Note: the coffee you get will less than the water you have added, as some

water is absorbed by coffee powder.

8) Always turn the coffee maker off and disconnect the power supply when

not use.

Note: Pay attention to pour the coffee out, otherwise you may be hurt as the

temperature of coffee just finished is high.

9) The coffee can be kept warm in the steel vacuum jug, suggest the time of

keeping warm is not more than 1 hour. For an optimum coffee taste, serve

it just after brewing.

CAUTION: Be sure to unplug this appliance before cleaning. To protect against

electrical shock, do not immerse cord, plug or unit in water or liquid. After

each use, always make sure plug is first removed from wall outlet.

1) Clean all detachable parts after each use in hot, sudsy water.

Note: When cleaning the steel vacuum jug, turn anti-clockwise the jug lid,

and then remove it. Fill the jug with water twice and then discarding the water.

Wiping the outer surface with a soft cloth, never use abrasive cleaner.

2) Wipe the product’s exterior surface with a soft, damp cloth to remove stains.

3) Water droplets may buildup in the area above the funnel and drip onto the