Daikin FHYC40JEVLK [9/32] Drain piping work

1-7

English

Drain Piping Work

Avoid installing the drain pipe in upward gradient after

the drain connection.

Ensure the height of drain pipe from ceiling is 700mm or

less if it is necessary to increase the height of drain pipe

to prevent water leak.

Avoid installing the drain pipe in up and down slope to

with thickness more than 8mm) on the drain piping to

avoid the condensed water dripping inside the room.

Connect the main drain pipe to the flexible drain hose.

Feed water from flexible drain hose to check the piping

for leakage.

When the test is completed, connect the flexible drain

hose to the drain connector on the indoor unit.

•

•

•

•

NOTE

This Indoor Unit uses a drain pump for condensed water drainage. Install the unit horizontally to prevent water leakage

or condensation around the air outlet.

Panel Installation

The front panel can only be fitted in one direction, follow the piping direction. (Follow piping arrow sticker on front

panel)

Be sure to remove the installation template before installing the front panel.

•

•

Open the air intake grille by pulling back the catchers and removing it together with filter from panel.

Install the front frame panel onto the indoor unit by 4 screws and tighten it completely to prevent cool air leakage.

Connect the LED wire and air swing wire to the indoor unit.

Feed Water

Flexible Drain Hose

Panel

Flexible Hose

Indoor

Unit