Soundmax SM-2402 [6/17] Erase protection

• Press the STOP/EJECT button to stop the playing, press the button again to open the cassette door and you

can take out the tape.

• Press the "STOP" button followed by the REWIND or FORWARD button to rewind or forward the tape at

high speed.

Cassette tape recording

• Open the cassette door by pressing the "STOP/EJECT" cassette button.

• Insert a blank cassette with the tape-side up, into the proper Guide-rails on the inside of the cassette door.

• Gently push the cassette door forward (inwards) to close it.

• Make sure the tape is fully and properly inserted before doing so.

• The set is now ready to start recording, which can be done from either the radio or CD-player.

Recording from radio

• Set the FUNCTION switch to RADIO position.

• Tune to the desired station.

• Press the PLAY button and RECORD button on deck simultaneously to start recording.

• Press STOP/ EJECT button to end recording

Recording from CD

• Set FUNCTION switch to CD/MP3 position.

• Press RECORD and PLAY buttons on cassette deck simultaneously to start recording.

• Press the PAUSE button on deck.

• Start the CD-player and select the exact song to be recorded.

• Release the PAUSE button on deck to start recording.

• Press STOP/ EJECT button to end recording.

Erase protection

• To prevent accidental erasing of a cassette, simply break off the two plastic tabs located

on the cassette tape’s rear side.

• When a cassette with removed plastic tabs is inserted, the recording button cannot be

pressed.

• If a cassette is to be erased and re-recorded at a later stage, simply cover the holes on the

cassette where the tabs were removed, with a piece of strong adhesive tape.