Panasonic WV-CW500S/G [19/32] Setting of scene change detection

Step 4

Use the up, down, right, and left buttons to determine the left upper position of the area to be set and press the setting button.

Note:

 • Theareacorrespondingtotheselectednumberwillbedisplayedinagreenframe,whiletheothersetareasareshowninawhite

frame.

Step 5

Use the up, down, right, and left buttons to determine the right lower position of the area to be set and press the setting button.

→ The asterisk mark "*" will be displayed after the number and the area setting will be saved.

Note:

 • Todeletethearea,selecttheareanumberandpressthesettingbuttonaftermovingthecursorto"DEL".

 • Tochangethesettingsofthearea,selecttheareanumberandrepeatfromstep3.

Setting of scene change detection

This function detects a change in the subject state that occurs by covering the camera with a cloth, a cap, or others, or by changing

the camera direction largely.

Follow the procedure below.

Step 1

Move the cursor to "i-VMD" and press the setting button.

→ The "i-VMD SETUP" screen appears.

Step 2

Move the cursor to "SCENE CHANGE" and select from the following.

ON: Provides an alarm signal when scene change is detected.

OFF (default): Disables scene change detection.

**i-VMD SETUP**(1)

MOTION DET

OBJECT DET OFF

SCENE CHANGE OFF

INDICATOR OFF

ALARM CONT

RET TOP END

"i-VMD SETUP" screen

**CAMERA SETUP**

SCENE1

ALC ALC

SHUTTER OFF

AGC ON(HIGH)

SENS UP OFF

WHITE BAL ATW1

DNR HIGH

BW MODE AUTO1

i-VMD

RET TOP END

"CAMERA SETUP" screen