Home
Главная
Binatone
Утюг
SI-2550
Инструкция по эксплуатации Страница: 6

Binatone SI-2550 [6/38] Care and maintenance

tank

(5)(5)

(5) runs out of water, disconnect the appliance from the

mains outlet, wait till it cools down, refill the tank and plug the

appliance back into the power supply and continue the process.

Spray

Using the water spray

(7)(7)

(7) will help when ironing details of the

article (cuffs, trimmings, plackets, etc) or clothes, which demand

«•» (low temperature) ironing, when steam ironing is not possible.

Push the button several times to moisten the material.

5. When you have finished cleaning or ironing, do not forget to

switch the iron off by putting the steam control knob

(9)(9)

(9) and the

temperature control knob

(10)(10)

(10) into the «0» position and un-

plugging the appliance from the mains supply outlet.

CARE AND MAINTENANCE

Cleaning of the sole plate

! The scale on the sole plate can be removed

with a rough cotton cloth dampened with a

vinegar solution.

! Do not use any abrasive substances and ma-

terials to clean the sole plate.

Cleaning of internal parts of the appliance

SI-2550 iron is equipped with an anti-scale function which

protects it from an accumulation of scale: it does this with a built-in

permanent filter. Therefore the water hardness is reduced and the

useful service life of the iron is extended.

Warning: In areas with very hard water it is recommended

that you regularly remove scale from the appliance to

maintain it in good working order. Excess lime scale

may result in damage or malfunction of your product.

If in your area the water is soft and you have average amounts

of clothes to be ironed then we recommend you to de-scale every 6

months. If the water in your area is very hard or if you iron fre-

quently, then we recommend you de-scale once a month.

Your iron has a self-cleaning function, which allows you to clean

the internal parts of the appliance from scale or dust. To use this

function perform the following procedure:

1. Set the steam control knob

(9)(9)

(9) into the «0» position.

2. Fill the tank

(5)(5)

(5) with water to the «Max» level.

3. Place the iron in a vertical position and plug it into the mains

supply outlet.

4. Set the temperature control knob

(10)(10)

(10) into the «Max» position.

The light indicator

(11)(11)

(11) will light up showing that the iron is

being heated to the desired temperature.

5. When the iron reaches the maximum temperature, the light

indicator

(11)(11)

(11) will go out.

6. Whilst holding the appliance horizontally over a sink, set the

steam control knob

(9)(9)

(9) into the «Self-Clean» position. Hot

steam will discharge from the sole plate

(12)(12)

(12) removing the

Содержание

Похожие устройства

tank 5 runs out of water disconnect the appliance from the mains outlet wait till it cools down refill the tank and plug the appliance back into the power supply and continue the process Spray Using the water spray 7 will help when ironing details of the article cuffs trimmings plackets etc or clothes which demand low temperature ironing when steam ironing is not possible Push the button several times to moisten the material 5 When you have finished cleaning or ironing do not forget to switch the iron off by putting the steam control knob 9 and the temperature control knob 10 into the 0 position and un plugging the appliance from the mains supply outlet CARE AND MAINTENANCE Cleaning of the sole plate The scale on the sole plate can be removed with a rough cotton cloth dampened with a vinegar solution Do not use any abrasive substances and ma terials to clean the sole plate Cleaning of internal parts of the appliance SI 2550 iron is equipped with an anti scale function which protects it from an accumulation of scale it does this with a built in permanent filter Therefore the water hardness is reduced and the useful service life of the iron is extended Warning In areas with very hard water it is recommended that you regularly remove scale from the appliance to maintain it in good working order Excess lime scale may result in damage or malfunction of your product If in your area the water is soft and you have average amounts of clothes to be ironed then we recommend you to de scale every 6 months If the water in your area is very hard or if you iron fre quently then we recommend you de scale once a month Your iron has a self cleaning function which allows you to clean the internal parts of the appliance from scale or dust To use this function perform the following procedure 1 Set the steam control knob 9 into the 0 position 2 Fill the tank 5 with water to the Max level 3 Place the iron in a vertical position and plug it into the mains supply outlet 4 Set the temperature control knob 10 into the Max position The light indicator 11 will light up showing that the iron is being heated to the desired temperature 5 When the iron reaches the maximum temperature the light indicator 11 will go out 6 Whilst holding the appliance horizontally over a sink set the steam control knob 9 into the Self Clean position Hot steam will discharge from the sole plate 12 removing the 6

Скачать

Случайные обсуждения

Ответы 1

Что означает слово 'КАЗАК' на украинском и русском языках?

1 год назад