Hyundai H-CDM8017 [12/54] Setting other characteristics

Press CLK button anytime to view the time display.

Setting other characteristics

Press and hold for 2 seconds the SEL button to select the modes: TA SEEK/TA ALARM => PI SOUND/MUTE => RETUNE S/L =>

MASK DPI/ALL => BEEP ALL/2

/OFF=> SEEK => AUDIO DSP (POP/FLAT/POP/CLASSIC/ROCK)=> LOUDNESS ON/OFF=>

STEREO / MONO=> LOCAL/DX => VOL ADJ/LAST => ESP.

The display will show the following picture:

a. TA (Traffic Announcement) SEEK MODE

To determine what action will the radio take if the newly tuned station does not receive TP (Transport Program) information for 5

seconds. Rotate the VOL knob to select the desired mode: TA ALARM and TA SEEK.

- TA SEEK: when newly tuned station does not receive TP information for 5 seconds, the radio retunes to next station which has

not the same station (PI – Program Information) as the last station, but has the TP information. When TP information gets lost

at the current station for retune time which is set by RETUNE SHORT (60 seconds) or RETUNE LONG (90 seconds), the

radio starts to retune to next same PI station. When same PI station does not catch in 1 cyclic search, the radio retunes to next

station with TP information.

- TA ALARM: during searching the radio does not retune but the double beep sound (alarm) is output.

b. PI SOUND/MUTE

Choose PI sound or mute. PI sound refers to the reception noise when the AF function tries to scan alternative frequency.

c. RETUNE MODE

To determine the initial time of automatic TA search.

Rotate the VOL knob to select the desired mode: RETUNE L and RETUNE S.

- RETUNE L: 90 seconds.

- RETUNE S: 30 seconds.

Note: Retune mode is active for TA SEEK mode only.