Comet FDX Blade XL PRO 13.15 15/280 G Honda GX390 FW2 [22/180] Installation assembling the accessories and filling the engine crankcase with oil

Comet FDX Blade XL PRO 7.14 14/200 D Yanmar L70V ZWD [22/180] Installation assembling the accessories and filling the engine crankcase with oil
22
bag of accessories with:
- the operating and maintenance manual;
- the engine operating and maintenance manual;
- the declaration of conformity;
- the booklet giving the assistance centres;
- the warranty certicate;
- the handle xing kit: screws, washers (ENDURANCE);
- suction kit with: tting, gasket and clamp;
- nozzle cleaning needle;
If any problems arise please contact your dealer or an authorised assistance centre.
OPTIONAL ACCESSORIES
You can add the following range of accessories to the standard ones supplied with your high pressure
cleaner:
sandblasting lance: designed to smooth surfaces, removing rust, paint, encrustations, etc.;
drain cleaning kit: designed to unclog pipes and ducts;
dierent types of lances and nozzles;
rotating brush: designed for cleaning fragile surfaces;
rotating nozzle: designed for removing stubborn dirt;
foam lance: designed for a more ecient distribution of the detergent;
INSTALLATION - ASSEMBLING THE ACCESSORIES
AND FILLING THEENGINE CRANKCASE WITH OIL
Fix the handle (4) to the frame(3) using the kit supplied: screws(5), washers(6) and nuts(7) for FDX
ENDURANCE (in this case use a 13 mm xed jaw spanner, not supplied). OperationA in Fig.1, 2, 3 and
4.
Unwind the high pressure hose (30) and screw the end without the quickt coupling onto the spray
gun(19) thread and tighten well with two 22 mm xed jaw spanners (not supplied). OperationB in Fig.7.
Connect the quickt coupling(34) to the water outlet tting(15), screw down and tighten the ring nut
by hand. OperationC in Fig.7.
Insert the gasket(49) (FDXENDURANCE) or the water inlet lter(39) (for all the other models) in the
water inlet tting (16) and screw the water inlet hose-end tting (11) on to it. OperationD in Fig.7.
Clamp(37) the free end of the detergent suction hose(31) to the detergent suction tting(36).
OperationE in Fig.7.
Fill the engine crankcase with oil, following the instructions given in the relevant operating and
maintenance manual (this is not to be done on machines with Diesel engines as they are lled with
oil in the factory).
OPERATION – PRELIMINARY ACTIVITIES
Do the preliminary activities described in the operating and maintenance manual of the engine
mounted on the high pressure cleaner. In particular remember to ll with fuel and check the level of
engine oil.
When the engine is o and the machine is completely cold, check the level of pump oil by way of the
level indicator(38). Also check the gearbox oil level by way of the level indicator (44) on those models
thus equipped.
When topping up is needed please refer to the lubricant types given in the
“speCiFiCations and teChniCal
data
paragraph.
Check correct tyre ination.
Check that the inlet water lter(39) and the detergent suction lter(40) are clean. The FDX ENDURANCE
models have a professional suction lter(23) that needs to be inspected less frequently (please refer
to the
“routine MaintenanCe
paragraph).

Содержание

Похожие устройства

bag of accessories with the operating and maintenance manual the engine operating and maintenance manual the declaration of conformity the booklet giving the assistance centres the warranty certificate the handle fixing kit screws washers ENDURANCE suction kit with fitting gasket and clamp nozzle cleaning needle If any problems arise please contact your dealer or an authorised assistance centre OPTIONAL ACCESSORIES You can add the following range of accessories to the standard ones supplied with your high pressure cleaner sandblasting lance designed to smooth surfaces removing rust paint encrustations etc drain cleaning kit designed to unclog pipes and ducts different types of lances and nozzles rotating brush designed for cleaning fragile surfaces rotating nozzle designed for removing stubborn dirt foam lance designed for a more efficient distribution of the detergent INSTALLATION ASSEMBLING THE ACCESSORIES AND FILLING THE ENGINE CRANKCASE WITH OIL Fix the handle 4 to the frame 3 using the kit supplied screws 5 washers 6 and nuts 7 for FDX ENDURANCE in this case use a 13 mm fixed jaw spanner not supplied Operation A in Fig 1 2 3 and 4 Unwind the high pressure hose 30 and screw the end without the quickfit coupling onto the spray gun 19 thread and tighten well with two 22 mm fixed jaw spanners notsupplied Operation Bin Fig 7 Connect the quickfit coupling 34 to the water outlet fitting 15 screw down and tighten the ring nut by hand Operation C in Fig 7 Insert the gasket 49 FDX ENDURANCE or the water inlet filter 39 for all the other models in the water inlet fitting 16 and screw the water inlet hose end fitting 11 on to it Operation D in Fig 7 Clamp 37 the free end of the detergent suction hose 31 to the detergent suction fitting 36 Operation E in Fig 7 Fill the engine crankcase with oil following the instructions given in the relevant operating and maintenance manual this is not to be done on machines with Diesel engines as they are filled with oil in the factory OPERATION PRELIMINARY ACTIVITIES Do the preliminary activities described in the operating and maintenance manual of the engine mounted on the high pressure cleaner In particular remember to fill with fuel and check the level of engine oil When the engine is off and the machine is completely cold check the level of pump oil byway of the level indicator 38 Also check the gearbox oil level byway of the level indicator 44 on those models thus equipped When topping up is needed please refer to the lubricant types given in the SPECIFICATIONS AND TECHNICAL DATA paragraph Check correcttyre inflation Check that the inlet waterfilter 39 and the detergent suction filter 40 areclean The FDX ENDURANCE models have a professional suction filter 23 that needs to be inspected less frequently please refer to the ROUTINE MAINTENANCE paragraph

Скачать