Daikin UATYQ25ABAY1 [20/44] Programmable control

Translation from original instructions

Installation manual

20

We reserve the right to make changes without any prior notice.

UATYQ*Y1

Packaged Rooftop

4P522680-1

4.7.6 Programmable control

Forsomecongurationsandfunctionalities,aprogrammablecontrolisused.

Thegureshowsthemainscreen.

instruction for changing it.

The unit can be switched on from the keypad depending on whether all the other OK signal inputs for starting are

closed/enabled.

Theunitcanalwaysbeswitchedo󰀨fromthekeypad.

4.7.6.2 Changing from cooling to heating and vice versa

Thechangeofoperationcantakeplaceinoneofthefollowingthreeways,accordingtotheprogrammingrequired

by the customer:

- automatically as the temperature changes in the environment to be controlled;

- manually using the keypad or by remote management;

- by means of the digital input.

until "Setpoint" appears highlighted. Inside the "Setpoint" loop, there are screens where the various set points can be

changed within factory-set limits.

Conrmwiththe"enter"buttontoaccessthe"S0"screen,wherethecoolingtemperaturesetpointisshown,andto

positionthecursoratthetopleft.The"enter"buttonisusedtoaccesstheeldforchangingthevalue,whichcanbe

doneusingthe"arrow"buttons.Pressthe"enter"buttonagaintoconrmthesetvalueandreturnthecursortothe

top left.

When the cursor is at the top left of the screen, the down arrow button is used to go to the "S1" screen where the

heating temperature set point is shown.

The"enter"and"arrow"buttonscanalsobeusedinthesamewaytochangeandconrmthevalueofthesetpoint

shown in the screen and move on to the next one.