Daikin UATYQ50ABAY1 [37/44] External cleaning

Daikin UATYQ55ABAY1 [37/44] External cleaning
Translation from original instructions
Installation manual
37
We reserve the right to make changes without any prior notice.
UATYQ*Y1
Packaged Rooftop
4P522680-1
7.2 External cleaning
Thecomponentoftheunitthatneedsmostcareisthennedpackheatexchanger.
Itisessentialtokeepitcleanandfreeofdirtand/ordepositsthatcanhinderorpreventairow.
Regular cleaning of the surface of the coil is essential for the unit to work correctly and also increases the operating
life of the exchanger and the unit.
Frequentandcorrectcleaningofthecoilscontributestoconsiderablyreducingcorrosion.
Whilecleaningthennedpackheatexchanger,theelectricalcontrolpanelmustbeclosedandthe
main disconnect switch must be locked in the "OFF" position.
Using a jet of water on the coil while it is still dirty will cause deposits and pollutants to remain inside
theexchanger,whichwillmakecleaningevenmoredi󰀩cult.Allthedirtanddepositsmustthereforebe
removed from the surface before rinsing.
For units installed in coastal or industrial areas or in areas where there are aggressive chemicals in
theair,periodicrinsingwithcleanwaterisconsiderablybenecialandhelpscountercorrosivee󰀨ects.
Never clean the coils with chemicals, water containing bleach or acid or basic detergents. These
detergentscanbedi󰀩culttorinseo󰀨andcouldacceleratecorrosiononthejointbetweenpipeandn
andinareaswheredi󰀨erentmaterialscomeintocontact(CuandAl).
7.2.1 Cleaning the coils
The coils can be cleaned with a vacuum cleaner or a brush with soft, non-metallic bristles.
Alwayscleaninthedirectionofthensandneverperpendicularlytothem.Theycaneasilybebentanddamaged.
Cleanintheoppositedirectiontothenormalairow.
Thecoilcanthenberinsedusingonlydrinkingwateratlowpressure(3-5barg).
Rinsingmustbecarriedoutwithalowpressurejetofwatertoavoiddamagingthens.
Never use jets of water or high-pressure compressed air to clean the coil. The force of the jet of air or
watercouldbendthens,withaconsequentincreaseinaeraulicheadlossesontheexchangerand
lowering of the performance of the unit.

Содержание

Скачать