Hitachi WH10DL [8/76] English
Макгруп McGrp.ru
Задайте вопрос
Зарегистрироваться

Hitachi WH10DL [8/76] English

Hitachi WH10DL [8/76] English
7
English
5) Battery tool use and care
a) Recharge only with the charger specified by the
manufacturer.
A charger that is suitable for one type of battery
pack may create a risk of fire when used with
another battery pack.
b) Use power tools only with specifically designated
battery packs.
Use of any other battery packs may create a risk
of injury and fire.
c) When battery pack is not in use, keep it away
from other metal objects like paper clips, coins,
keys, nails, screws, or other small metal objects
that can make a connection from one terminal
to another.
Shorting the battery terminals together may
cause burns or a fire.
d) Under abusive conditions, liquid may be ejected
from the battery; avoid contact. If contact
accidentally occurs, flush with water. If liquid
contacts eyes, additionally seek medical help.
Liquid ejected from the battery may cause
irritation or burns.
6) Service
a) Have your power tool serviced by a qualified repair
person using only identical replacement parts.
This will ensure that the safety of the power tool
is maintained.
PRECAUTION
Keep children and infirm persons away.
When not in use, tools should be stored out of reach of
children and infirm persons.
PRECAUTIONS FOR CORDLESS IMPACT
DRIVER
1. This is portable tool for tightening and loosenig
screws. Use it only for these operation.
2. Use the earplugs if using for a long time.
3. One-hand operation is extremely dangerous; hold
the unit firmly with both hands when operating.
4. After installing the driver bit, pull lightly out the bit
to make sure that it does not come loose. If the bit is
not installed properly, it can come loose during
use, which can be dangerous.
5. Use the bit that matches the screw.
6. Tightening a screw with the impact driver at an
angle to that screw can damage the head of the
screw and the proper force will not be transmitted
to the screw. Tighten with this impact driver lined
up straight with the screw.
7. Always charge the battery at a temperature of 0 –
40°C. Charging the battery at temperatures outside
the range of 0 – 40°C may prevent proper charging
and reduce battery life.
The most suitable temperature for charging is that
of 20 – 25°C.
8. When one charging is completed, leave the charger
for about 15 minutes before the next charging of
battery.
Do not charge the battery more than 2 hours.
9. Do not allow foreign matter to enter the hole for
connecting the rechargeable battery.
10. Never disassemble the rechargeable battery and
charger.
11. Never short-circuit the rechargeable battery. Short-
circuiting the battery will cause a great electric
current and overheat. It results in burn or damage
to the battery.
12. Do not dispose of the battery in fire.
If the battery is burnt, it may explode.
13. When drilling in wall, floor or ceiling, check for
buried electric power cord, etc.
14. Bring the battery to the shop from which it was
purchased as soon as the post-charging battery life
becomes too short for practical use. Do not dispose
of the exhausted battery.
15. Using an exhausted battery will damage the charger.
16. Do not insert object into the air ventilation slots of
the charger.
Inserting metal objects or inflammables into the
charger air ventilation slots will result in electrical
shock hazard or damaged charger.
CAUTION ON LITHIUM-ION BATTERY
To extend the lifetime, the lithium-ion battery equips
with the protection function to stop the output.
In the cases of 1 to 3 described below, when using this
product, even if you are pulling the switch, the motor
may stop. This is not the trouble but the result of
protection function.
1. When the battery power remaining runs out, the
motor stops.
In such case, charge it up immediately.
2. If the tool is overloaded, the motor may stop. In this
case, release the switch of tool and eliminate causes
of overloading. After that, you can use it again.
3. If the battery is overheated under overload work,
the battery power may stop.
In this case, stop using the battery and let the
battery cool. After that, you can use it again.
Furthermore, please heed the following warning and
caution.
WARNING
In order to prevent any battery leakage, heat generation,
smoke emission, explosion and ignition beforehand,
please be sure to heed the following precautions.
1. Make sure that swarf and dust do not collect on the
battery.
䡬 During work make sure that swarf and dust do not
fall on the battery.
䡬 Make sure that any swarf and dust falling on the
power tool during work do not collect on the battery.
䡬 Do not store an unused battery in a location exposed
to swarf and dust.
䡬 Before storing a battery, remove any swarf and
dust that may adhere to it and do not store it together
with metal parts (screws, nails, etc.).
2. Do not pierce battery with a sharp object such as a
nail, strike with a hammer, step on, throw or subject
the battery to severe physical shock.
3. Do not use an apparently damaged or deformed
battery.
4. Do not use the battery in reverse polarity.
5. Do not connect directly to an electrical outlets or
car cigarette lighter sockets.
01Eng_WH10DL_EE 6/13/09, 10:58 AM7

Содержание

Похожие устройства

English 5 Battery tool use and care a Recharge only with the charger specified by the manufacturer A charger that is suitable for one type of battery pack may create a risk of fire when used with another battery pack b Use power tools only with specifically designated battery packs Use of any other battery packs may create a risk of injury and fire c When battery pack is not in use keep it away from other metal objects like paper clips coins keys nails screws or other small metal objects that can make a connection from one terminal to another Shorting the battery terminals together may cause burns or a fire d Under abusive conditions liquid may be ejected from the battery avoid contact If contact accidentally occurs flush with water If liquid contacts eyes additionally seek medical help Liquid ejected from the battery may cause irritation or burns 6 Service a Have your power tool serviced by a qualified repair person using only identical replacement parts This will ensure that the safety of the power tool is maintained PRECAUTION Keep children and infirm persons away When not in use tools should be stored out of reach of children and infirm persons PRECAUTIONS FOR CORDLESS IMPACT DRIVER 1 This is portable tool for tightening and loosenig screws Use it only for these operation 2 Use the earplugs if using for a long time 3 One hand operation is extremely dangerous hold the unit firmly with both hands when operating 4 After installing the driver bit pull lightly out the bit to make sure that it does not come loose If the bit is not installed properly it can come loose during use which can be dangerous 5 Use the bit that matches the screw 6 Tightening a screw with the impact driver at an angle to that screw can damage the head of the screw and the proper force will not be transmitted to the screw Tighten with this impact driver lined up straight with the screw 7 Always charge the battery at a temperature of 0 40 C Charging the battery at temperatures outside the range of 0 40 C may prevent proper charging and reduce battery life The most suitable temperature for charging is that of 20 25 C 8 When one charging is completed leave the charger for about 15 minutes before the next charging of battery Do not charge the battery more than 2 hours 9 Do not allow foreign matter to enter the hole for connecting the rechargeable battery 7 10 Never disassemble the rechargeable battery and charger 11 Never short circuit the rechargeable battery Short circuiting the battery will cause a great electric current and overheat It results in burn or damage to the battery 12 Do not dispose of the battery in fire If the battery is burnt it may explode 13 When drilling in wall floor or ceiling check for buried electric power cord etc 14 Bring the battery to the shop from which it was purchased as soon as the post charging battery life becomes too short for practical use Do not dispose of the exhausted battery 15 Using an exhausted battery will damage the charger 16 Do not insert object into the air ventilation slots of the charger Inserting metal objects or inflammables into the charger air ventilation slots will result in electrical shock hazard or damaged charger CAUTION ON LITHIUM ION BATTERY To extend the lifetime the lithium ion battery equips with the protection function to stop the output In the cases of 1 to 3 described below when using this product even if you are pulling the switch the motor may stop This is not the trouble but the result of protection function 1 When the battery power remaining runs out the motor stops In such case charge it up immediately 2 If the tool is overloaded the motor may stop In this case release the switch of tool and eliminate causes of overloading After that you can use it again 3 If the battery is overheated under overload work the battery power may stop In this case stop using the battery and let the battery cool After that you can use it again Furthermore please heed the following warning and caution WARNING In order to prevent any battery lea kage heat generation smoke emission explosion and ignition beforehand please be sure to heed the following precautions 1 Make sure that swarf and dust do not collect on the battery O During work make sure that swarf and dust do not fall on the battery O Make sure that any swarf and dust falling on the power tool during work do not collect on the battery O Do not store an unused battery in a location exposed to swarf and dust O Before storing a battery remove any swarf and dust that may adhere to it and do not store it together with metal parts screws nails etc 2 Do not pierce battery with a sharp object such as a nail strike with a hammer step on throw or subject the battery to severe physical shock 3 Do not use an apparently damaged or deformed battery 4 Do not use the battery in reverse polarity 5 Do not connect directly to an electrical outlets or car cigarette lighter sockets

Скачать