Haier ABH140K1ERG [3/16] Energy
Макгруп McGrp.ru
Задайте вопрос
Зарегистрироваться

Haier ABH140K1ERG [3/16] Energy

Haier ABH140K1ERG [3/16] Energy
- 3 -
3 minutes
protection
180° sine wave
DC motor
Blue
B
u
e
Widely
electricity Hz
DRED
Auto restart
24 hours timer
Sleep mode
Auto mode
Auto-swing
DRY function
Drain
water pump
Child lock
Self-diagnosis
function
Evaporator
self-cleaning
Fresh Air Connection
WI-Fi Control
Compatible
ENERGY
HEALTH COMFORT
TECHNOLOGY
RELIABILITY
CONVENIENCE
Control via with smart phone or tablet which can connect
to the Internet
Outlet louvers can be independently controlled.
Outdoor unit designed for heating operation down to - 20
°C
Allows the system pressures to balance before attempting
start of the compressor, to prevent damage and excessive
power consumption.
Outdoor Unit designed for cooling operation down to - 15
°C
The heat exchanger aluminium fi n stock has a Hydrophilic
coating for its anti- corrosion properties and its low
surface tension, which enables water droplets to fl ow off
the surface better than standard Aluminium fi n.
Branch outlet for connection to ducting
Wide angle airfl ow.
Temperature requirement shift during sleep, as we remain
inactive. The system will adjust temperature and noise for a
more comfort during sleep.
Dry Mode concentrates on RH% humidity reduction and
less on temperature.
Microprocessor controlled motors change the direction of
outlet airfl ow, imitating nature.
4 fan settings
Adoption of DC fan motor permits 4 fan speed control by
the user.
Fresh air duct connection to allow fresh air to be ducted
directly into the unit, improving room oxygen levels.
DC inverter A-PAM inverter 180°sine wave inverter technology
will reduce vibration at low compressor frequency , reduce noise
and energy at lower RPM’s when compared to a standard inverter
system.
Latest technology DC motor adopted instead of AC motors. DC
motor require reduced power to operate versus a typical AC motor.
Built-in microprocessor allows for programmability and better
control.
On/Off control card can be managed by a simple on/off device such
as a hotel card system
Demand Response Enabling Device. It provides a method by which
a power supply company limit the amount of power that a appliance
will consume. The aim is to reduce peak demand to the power
supply network at critical peak load times.
Connection of more than one indoor unit so they can operate as a
group.
Connection to a accessory central control device to allow
independent operation of more than one device at a central
location.
Connection possible to a Building Management System via a
interface accessory device.
Built in timer
Prevent unauthorised operation
Self diagnosis function. In the event of failure a error code
will be displayed.
In cooling or dehumidifi cation mode operation, the dust on the
evaporator is removed with the condensate water, and after the
cooling has shut down the fan will continue to operate to dry the
evaporator.
Premium air fi ltration for removal of smaller airborne dust particles,
and other materials.
Built-in microprocessor automatically detects room
temperature and determines operation mode either
heating or cooling.
Inbuilt condensate pump to elevate condensate to allow for fl exible
location of indoor unit.
Auto restart after power failure, in the event of a power
outage.
Designed for both 50 and 60Hz power supply.
ICON LEGEND
Group
control
Central
control
BMS
-20°C heating
-15°C cooling
Branch outlet
Built-in valve
Pipe connection inside cabinet for a smooth exterior
MEPS
Minimum Energy Performance Standards (MEPS)
Conforms to Australian and New Zealand standard
AS/NZS3823.2.2013

Содержание

Похожие устройства

Скачать