Haier AF092XCEAA [9/17] Maintenance

Maintenance

Maintenance at the end of application season

On a fine day, unit shall be started and operate in

FAN mode for about half a day until the inside of

the unit becomes thoroughly dry.

Turn off the unit operation switch and power on/off.

Otherwise,there will be some electricity consumption

even the unit is in stop status.

Clean the filter and indoor,cover the units well.

Maintenance before beginning of application season

Check there are no obstacles in the air

inlet and

outlet to avoid impairing of working

efficiency.

Please do attach the air filter to ensure the

electrostatic filters not soiled.Otherwise,dirt

will come into and damage the unit or bring

failures.

Cleaning of the unit

Take off the air inlet grill

First switch off the power supply,take off the

screw cap,loosen the screw with cross screwdriver .

Clean the filter

Use water or vacuum cleaner to remove

dust. If it is too dirt, clean with detergent or

neutral soap water.

Rinsing with fresh water, dry the filter and

re-assemble.

Caution:

Do not wash filter in hot water above 40∞C,

which will damage the filter.

Do carefully wipe the filter.

Clean the indoor(outdoor) unit

Clean with warm cloth or neutral detergent,

then wipe away moisture with dry cloth. Do

not use too hot water(above 40∞C),which will

cause discoloration or deformation. Do not

use pesticide or other chemical detergents.

Turn off the power switch

Do not touch with wet hand

Do not clean with hot

water or solvent