Haier AS092XCEAA [10/21] Operation and maintenance

Operation and Maintenance

8

Emergency and Test Operation

Use this operation only when the remote controller is defective or lost.

When the emergency operation switch is pressed "Pi" sound is heard once,

which means the start of this operation.

In this operation,the system automatically selects the operation modes, cooling

or heating, according to the room temperature.

Use this switch in the test operation when the room temperature is below

16

o

C, do not use it in the normal operaion.

Continue to press the test operation swich for more than 5 seconds, after

you hear the "Pi" sound twice, release your finger from the switch:the

cooling operation starts with the air flow speed "Hi".

Removal of the restriction of emergency or test operation.

Press the emergency operation switch once more, or manipulate through the remote controller ;

the "Pi" sound, the emergency or test operation is stopped.

When the remote controller is manipulated, it gets the system back to the normal operation mode.

3.Use water or vacuum cleaner to clean it. If it is extremely dirty,wash it with neutral detergent or soap water.

4.Wash it with clean water and install it after complete dry.

5.Close the inlet grill.

Caution:

Do not use hot water over 40

o

Wipe air filter carefully.

Clean it with warm and wet cloth or with neutral detergent, then wipe it dry with clean and soft cloth.

If air conditioner is very dirty, clean it with cloth soaked in neutral detergent, then wipe off the detergent

with clean water.