Haier ESA410M [9/80] Warning

ENGLISH

1. DO NOT cut or remove the grounding prong on the attached power supply cord. Doing so may

cause sparks or fire, and voids all warranties. For safety purposes the air conditioner must be

properly grounded.

2. To avoid a fire hazard or possible electric shock, DO NOT use an adapter plug, extension cord,

surge protectors, or multi-outlet adapters with the air conditioner.

3. The power supply cord is equipped with a 3-prong plug which mates with a standard 115 volt

wall outlet to minimize the possibility of electrical shock from this air conditioner.

4. The power supply cord includes a leakage current detection interrupter device (LCDI). A

RESET and TEST button are on the plug case. The device should be tested on a periodic

basis by pressing the TEST button and then the RESET button while it is plugged into the wall

outlet. If the TEST button does not trip or the RESET will not stay engaged, do not use the air

conditioner and contact a qualified service technician.

5. Have the wall outlet and circuit inspected by a qualified electrician to ensure that the wall outlet

is properly grounded.

6. If there is a 2-prong wall outlet present and not a 3-prong wall outlet, it is the responsibility of

the user to have it replaced with a properly grounded 3-prong outlet.

7. The air conditioner should always be plugged into a dedicated electrical outlet which has a

voltage rating that matches the serial label on the side of the air conditioner.

8. The electrical ratings for your air conditioner are listed on the Model/Serial Number label. The

Model/Serial Number label is located on the side of the air conditioner cabinet, or behind the

front grille.

9. Specific electrical requirements are listed in the chart below. Follow the requirements for the

type of plug on the power supply cord.

ELECTRICAL SAFETY and WARNINGS

WARNING

INSTALLATION REQUIREMENTS PAGE 7

ELECTRICAL REQUIREMENTS