Haier AE092FCAHA [114/174] Indoor unit

1 Fitting of the Mounting plate and Positioning of the Wall Hole

1 Carry out,based on the neighboring pillars or lintels, a proper leveling for the plate to be fixed against the

wall,then temporarily fasten the plate with one steel nail.

2 Make sure once more the proper level of the plate,by hanging a thread with a weight from the central top

of the plate,then fasten securely the plate with the attachment steel nail.

3 Find the wall hole location A using a measuring tape.

Holes for fixing the mounting plate

1 Stick a paper pattern on the wall horizontally

2 Position by using the pattern then remove the pattern.

lndoor side

Outdoor side

Thickness

of wall

wall hole

B mm

When the mounting plate is fixed to side bar and lintel

(Section of wall hole) Piping hole pipe

Fix to side bar and lintel a mounting bar, which is separately sold,and then fasten the plate to the fixed

mounting bar.

Refer to the previous article," ",for the position of wall hole.

When the mounting plate is first fixed

Fit the level line

When the paper pattern is used

Make a hole of 60mm in diameter, slightly descending to outside

the wall

lnstall piping hole cover and seal off with putty after installation.

2 Making Hole on the Wall and Fitting the Piping Hole Cover

When the mounting plate is first fixed

Weight

Thread

Mounting

Plate

Fit the scale to a line

Center of a Bmm hole

(insert a scale)

Outline of mounting plate

Outline of indoor unit

Position of Bmm hole

Paper pattern

Indoor Unit

The installation of wall mounted type