Haier HW90-1482 [6/20] Before use

BEF

RE U

DISMANTLE THE TRANSPORTATION BOLTS

The transportation bolts are designed for clamping anti-vibration components

inside of the washing machine during the transportation process.

Remove the back cover.1.

Remove the four bolts on the rear side and take out the synthetic 2.

stabilisers from within the machine.

Replace the back cover.3.

Fill the holes left by the bolts with blanking plugs.4.

Note:

1.When you replace the back cover,the convexity must face

to outside, and you have to insert the back cover from the

two gaps as shown in ﬁg.5.

2.Keep the transportation bolts and synthetic stabilisers

in a safe place for later use.

ADJUSTING THE WASHING MACHINE

There are adjustable feet under the bottom of the washing machine. Before use, they should be

adjusted so that the machine is level. This will minimise vibrations and thus noise during use. It will also

reduce wear and tear. We recommend using a spirit level to level the appliance.The ﬂoor should be as

stable and ﬂat as possible.

INSTALLATION