Haier HWM85-1479 [8/24] Before use

Before Use

Installation

Fitting the base cover

Before removing the transportation bolts, please

fix the base cover to the bottom of the washing

machine. Lay down the machine (fig1) screw off

the feet and adjust the base cover with the four

holes corresponding to the screw holes of the

feet. Then screw the feet back on through the

cover and fix it securely to the bottom of the

machine (fig2).

The base keeps out any dampness and reduces

the noise

Removing the transportation bolts

The transportation bolts are designed for clamping,anti-

vibration components inside the washing machine during the

transportation process

 Remove the back cover. Fig 1.

 Remove the four bolts on the rear side and take out the

synthetic stabilisers from within the machine Fig 2

 Replace the back cover. Fig 3.

 Fill the holes left by the bolts with blanking plugs. Fig 4.

When replacing the back cover, ensure the convex

surface is facing outwards, and insert the back

cover between the gaps as shown in Fig. 5.

Keep the transportation bolts and synthetic

stabilisers in a safe place for later use

Adjusting the feet

There are adjustable feet under the bottom of the washing machine.

Before use, they should be adjusted so that the machine is level. This will

minimize vibrations and noise during use. It will also reduce wear and tear. We

recommend using a spirit level to level the appliance. The floor should be as

stable and flat as possible.