Haier HWM90-M826 [7/20] Installation adjustment

Please install and adjust the machine according to the directions containedin this

manual.It is very important to follow these directions for the safe operation of the

machine,and to ensure your machine operates correctly.

Installation & Adjustment

Back

Front

Screw

Bottom plate Carpet

Do not install this machine on an incline greater than 2° . Installing machine on an

angle or on rough ground will result in unstable running or stoppage of the

machine. Please adjust it by the following method:

1.Confirm it is level

2.Lift up the side of the leg slightly and twist the adjustable leg.

Balance washing machine

Install the bottom plate

The purpose of the bottom plate is to su ppress noise

from the washing machine during operation.

Steps:

2. Place the plate onto the bottom of the machine.

3. Use a screwdriver to tighten the screw ( in accessory

bag) securing the panel to bottom of the washer.

4. Once the screw is tight and the panel is secure, return

the washer to its standing position.

1. Lay the washer on its back, on a nonabrasive surface.

Note: The distance between the washing machine

and wall:at least 20 mm.

Change the direction of the drain hose

Applicable model ：HWM90-M826